1997 Ford F350 Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1997 Ford F350 Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | 9/16 18 |
| Center Bore (CB) | 124.9 mm |
| Offset (ET) | 0 |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 8x165.1 is commonly referred to as 8x6.5" in US Standard.
1997 F350 Regular Cab — Year-Specific Fitment Context
The 1997 model year is the final year of the Ford F350 Regular Cab's 8x165.1 bolt pattern run (since 1992). Wheels from any 1992–1997 Ford F350 Regular Cab are cross-compatible with the 1997 model.
Ford F350 Regular Cab Bolt Pattern by Year
The table below shows how the F350 Regular Cab's wheel specifications have changed over the years. The 1997 model year is highlighted.
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
Expert Buying Guide for 1997 Ford F350 Regular Cab
For your 1997 Ford F350 Regular Cab, the 8x165.1 bolt pattern is shared with 1992-1997 models, but the 124.9mm center bore is critical. Aftermarket wheels often have a larger bore (e.g., 130.1mm), requiring hub-centric rings to prevent vibration and ensure load is on the hub, not the studs. The factory offset is 0mm; deviations affect scrub radius and steering feel. Always use lug nuts with the correct 9/16-18 thread and proper seat (factory uses cone seat). Ball-seat or incorrect thread can cause wheel loss. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Ford F350 Regular Cab appears from 1992 to 1997 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Use hub-centric rings if aftermarket wheels have a bore larger than 124.9mm to avoid vibration.
- ✅ Stick to 0mm offset; even +10mm can cause tire rubbing on suspension components.
- ✅ Re-torque lug nuts to 165 ft-lbs after 50-100 miles; check for proper cone seat engagement.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1997 Ford F350 Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 1997 Ford F350 Regular Cab?
The 1997 Ford F350 Regular Cab uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 124.9mm and the offset is 0mm.
What other years of Ford F350 Regular Cab have the same bolt pattern as the 1997?
The Ford F350 Regular Cab uses the 8x165.1 pattern from 1992 through 1997. Wheels from any of these model years are dimensionally compatible with the 1997, provided the offset and center bore also match.
How do I measure the bolt pattern on my 1997 Ford?
The 1997 F350 Regular Cab uses a 8x165.1 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Why is matching the 124.9mm center bore important for the 1997 F350 Regular Cab?
The 124.9mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
How tight should I torque the lug nuts on a 1997 Ford F350 Regular Cab?
Refer to your owner's manual for exact specs, but always tighten the 9/16 18 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I put aftermarket wheels on my 1997 Ford F350 Regular Cab?
Absolutely. Just ensure the aftermarket wheels have a 8x165.1 bolt pattern, an offset near 0mm, and a center bore of at least 124.9mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset