1992 Dodge D250 Club Cab Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1992 Dodge D250 Club Cab, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 8x165.1 (8x6.5")
Lug Nut / Bolt Size 1/2-20
Center Bore (CB) 121.3 mm
Offset (ET) 0-15mm
Torque Specs 140 ft-lbs (190 Nm)

1992 D250 Club Cab — Year-Specific Fitment Context

The 1992 model year marks the beginning of the Dodge D250 Club Cab's 8x165.1 bolt pattern era, which continued through 1993 (2 consecutive years). Wheels from any 1992–1993 Dodge D250 Club Cab are cross-compatible with the 1992 model.

Dodge D250 Club Cab Bolt Pattern by Year

The table below shows how the D250 Club Cab's wheel specifications have changed over the years. The 1992 model year is highlighted.

Year Bolt Pattern Center Bore Offset
▸ 1992 8x165.1 121.3 0-15mm
1993 8x165.1 121.3 0-15mm

Fitment Notes

The 1992 Dodge D250 Club Cab has a bolt pattern of 8x165.1.

Imperial Conversion: This bolt pattern is commonly referred to as 8x6.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 8x6.5".

This means it is a 8 lug pattern with a circle diameter of 165.1mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, Dodge D250 Club Cab appears from 1992 to 1993 (2 model years).

Across recorded model years, this model generally keeps the same bolt pattern.

8x165.1 Pattern Context

This bolt pattern appears on 846 vehicles in our current database and is considered common.

Examples of other vehicles using 8x165.1:

1992 Dodge D250 Club Cab — Frequently Asked Questions

What is the bolt pattern for a 1992 Dodge D250 Club Cab?

The 1992 Dodge D250 Club Cab uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 121.3mm and the offset is 0-15mmmm.

What other years of Dodge D250 Club Cab have the same bolt pattern as the 1992?

The Dodge D250 Club Cab uses the 8x165.1 pattern from 1992 through 1993. Wheels from any of these model years are dimensionally compatible with the 1992, provided the offset and center bore also match.

What is the PCD for a 1992 Dodge D250 Club Cab?

PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1992 D250 Club Cab, the PCD is 8x165.1.

Can I put aftermarket wheels on my 1992 Dodge D250 Club Cab?

Absolutely. Just ensure the aftermarket wheels have a 8x165.1 bolt pattern, an offset near 0-15mmmm, and a center bore of at least 121.3mm (using hub rings if larger).

What lug nut size does the 1992 Dodge D250 Club Cab use?

The 1992 Dodge D250 Club Cab uses 1/2-20 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.

Do 1992 Dodge D250 Club Cabs use lug bolts or lug nuts?

The 1992 D250 Club Cab requires 1/2-20 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

Dodge D250 Club Cab is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 1992 Dodge D250 Club Cab, please report it via our About page contact so we can verify and update this record.

Dodge D250 Club Cab By Year

1992 1993

Other Dodge Models

Caravan Cargo Challenger D250 Club Cab D250 Regular Cab Dakota Crew Cab Dakota Quad Cab Daytona Intrepid Ram 1500 Regular Cab Ram 2500 Quad Cab Ram 3500 Regular Cab Ram Van 1500 Ram Wagon 2500 Ram Wagon 3500 Ram Wagon B150 Ram Wagon B350 Shadow Sprinter 3500 Cargo Stratus Viper