2026 Ford Maverick Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Ford Maverick is 5x108. It has a center bore of 63.4 mm, an offset range of 35-45, and utilizes 14x1.5 (Flat seat, 21mm hex) fasteners tightened to 100 ft-lbs (135 Nm).
2026 Ford Maverick Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Center Bore (Hub Bore) | 63.4 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 100 ft-lbs (135 Nm) |
2026 Maverick — Year-Specific Fitment Context
The 2026 model year is the final year of the Ford Maverick's 5x108 bolt pattern run (since 2022). Wheels from any 2022–2026 Ford Maverick are cross-compatible with the 2026 model.
Ford Maverick Bolt Pattern by Year
Looking for all generations? View the complete Ford Maverick (2022–2026) Bolt Pattern & Generation Guide →
The table below shows how the Maverick's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Ford Maverick Wheel Interchange & Donor Fitment Guide (5x108)
The 5x108 bolt pattern is shared by 606 vehicles in our database (common). For safe wheel swaps on the 2026 Ford Maverick, donor rims must match the 5x108 PCD and have a center bore of at least 63.4 mm:
DIRECT HUB MATCH Same 5x108 Pattern & Exact 63.4mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 Lincoln Corsair | 63.4 mm (Exact) | 50-55 | 12x1.5 (Ball) |
| 2019 Lincoln MKC | 63.4 mm (Exact) | 35-50mm | M12x1.5 (Cone) |
| 2017 Lincoln MKX | 63.4 mm (Exact) | 50 | N 1/2"x20 (Cone) |
| 2012 Lincoln MKZ | 63.4 mm (Exact) | 50 | N 12x1.50 (Cone) |
| 2025 Lincoln Nautilus | 63.4 mm (Exact) | 35-45 | 14x1.5 (Flat) |
| 2021 Polestar 1 | 63.4 mm (Exact) | 35-45mm | M14x1.5 (Cone) |
HUB RING FITMENT Same 5x108 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 1996 Volvo 850 | 65.1 mm | 65.1mm → 63.4mm |
43 |
| 2016 Volvo S80 | 65.1 mm | 65.1mm → 63.4mm |
52,5 |
| 1998 Volvo V70 | 65.1 mm | 65.1mm → 63.4mm |
43 |
| 1997 Volvo V90 | 65.1 mm | 65.1mm → 63.4mm |
43 |
| 2003 Volvo XC70 | 65.1 mm | 65.1mm → 63.4mm |
43 |
| 2003 Volvo XC90 | 65.1 mm | 65.1mm → 63.4mm |
49 |
Quick Tips & Safety Warnings
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Ford Maverick — Frequently Asked Questions
What is the bolt pattern for a 2026 Ford Maverick?
The 2026 Ford Maverick uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 35-45mm.
What other years of Ford Maverick have the same bolt pattern as the 2026?
The Ford Maverick uses the 5x108 pattern from 2022 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
Can I use spacers on my 2026 Ford Maverick?
Yes, but ensure the wheel spacers match the 5x108 bolt pattern and 63.4mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
Can I put aftermarket wheels on my 2026 Ford Maverick?
Absolutely. Just ensure the aftermarket wheels have a 5x108 bolt pattern, an offset near 35-45mm, and a center bore of at least 63.4mm (using hub rings if larger).
What does 35-45mm offset mean for the 2026 Maverick?
An offset of 35-45mm means the wheel's mounting surface is 35-45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ford.
What lug nut size does the 2026 Ford Maverick use?
The 2026 Ford Maverick uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →