2010 Ford Ranger SuperCab Bolt Pattern

Quick Answer: The factory bolt pattern (lug pattern) for a 2010 Ford Ranger SuperCab is 5x114.3 (5x4.5"). It has a center bore of 78.1 mm, an offset range of 12-20, and utilizes 1/2 20 (Cone seat, 19mm hex) fasteners tightened to 100 ft-lbs (135 Nm).

2010 Ford Ranger SuperCab Wheel Fitment Specs

Bolt Pattern (Lug Pattern) 5x114.3 (5x4.5")
Center Bore (Hub Bore) 78.1 mm
Offset Range (ET) 12-20
Thread Size (Lug Nut / Bolt) 1/2 20
Fastener Seat Type Conical 60° (Cone / Tapered)
Lug Wrench / Socket Hex Size 19mm
Wheel Torque Specs 100 ft-lbs (135 Nm)
💡

Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.

🛠️ Managing a shop, wheel inventory, or app? Stop searching one by one.
Download 12,902 Vehicle Database (CSV) →
🔍 Check fitment for other vehicles using our Ultimate Bolt Pattern Finder tool →

2010 Ranger SuperCab — Year-Specific Fitment Context

The 2010 Ford Ranger SuperCab is in year 19 of 20 using the 5x114.3 pattern (1992–2011). Wheels from any 1992–2011 Ford Ranger SuperCab are cross-compatible with the 2010 model. Across its full production run (1992–2023), the Ranger SuperCab has also used: 6x139.7.

Ford Ranger SuperCab Bolt Pattern by Year

Looking for all generations? View the complete Ford Ranger SuperCab (1992–2023) Bolt Pattern & Generation Guide →

The table below shows how the Ranger SuperCab's wheel specifications have changed over the years. The 2010 model year is highlighted.

Year Bolt Pattern Center Bore Offset
1992 5x114.3 70.5 12-20
1993 5x114.3 70.5 12-20
1994 5x114.3 70.5 12-20
1995 5x114.3 70.5 12-20
1996 5x114.3 70.3 12-20
1997 5x114.3 70.3 12-20
1998 5x114.3 70.5 12-20
1999 5x114.3 70.5 12-20
2000 5x114.3 70.5 12-20
2001 5x114.3 70.5 12-20
2002 5x114.3 70.3 12-20
2003 5x114.3 70.3 12-20
2004 5x114.3 70.3 12-20
2005 5x114.3 78.1 12-20
2006 5x114.3 78.1 12-20
2007 5x114.3 78.1 12-20
2008 5x114.3 78.1 12-20
2009 5x114.3 78.1 12-20
▸ 2010 5x114.3 78.1 12-20
2011 5x114.3 78.1 12-20
2019 6x139.7 93.1 55
2020 6x139.7 93.1 55
2021 6x139.7 93.1 55
2022 6x139.7 93.1 55
2023 6x139.7 93.1 55

2010 Ford Ranger SuperCab Wheel Interchange & Donor Fitment Guide (5x114.3)

The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2010 Ford Ranger SuperCab, donor rims must match the 5x114.3 PCD and have a center bore of at least 78.1 mm:

DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 78.1mm Center Bore (No Hub Rings Needed)

Compatible Donor Vehicle Center Bore OEM Offset (ET) Lug Thread & Seat
2021 Maserati Quattroporte 78.1 mm (Exact) 45 14x1.5 (Cone)

HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)

Donor Vehicle Donor Bore Required Hub Ring (OD → ID) OEM Offset (ET)
2002 Toyota 4Runner 106.1 mm 106.1mm → 78.1mm 12
Looking for all models? View the complete directory of vehicles with 5x114.3 bolt pattern →

Quick Tips & Safety Warnings

Ready to upgrade or perform maintenance?

🛒 Shop Tools & Accessories on Amazon

As an Amazon Associate, I earn from qualifying purchases.

2010 Ford Ranger SuperCab — Frequently Asked Questions

What is the bolt pattern for a 2010 Ford Ranger SuperCab?

The 2010 Ford Ranger SuperCab uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 78.1mm and the offset is 12-20mm.

What other years of Ford Ranger SuperCab have the same bolt pattern as the 2010?

The Ford Ranger SuperCab uses the 5x114.3 pattern from 1992 through 2011. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.

Do 2010 Ford Ranger SuperCabs use lug bolts or lug nuts?

The 2010 Ranger SuperCab requires 1/2 20 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.

How do I measure the bolt pattern on my 2010 Ford?

The 2010 Ranger SuperCab uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.

What is the factory wheel offset for a 2010 Ford Ranger SuperCab?

The OEM offset for the 2010 Ranger SuperCab is typically around 12-20mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.

Will wheels from another Ford fit my 2010 Ranger SuperCab?

Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 78.1mm.

For Tire & Wheel Shops, Shopify Stores & Developers

Running a Tire Shop or Wheel Store?

Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.

Get Master Spreadsheet (CSV) →
Confidence Level
Medium
Verified Source
Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last Updated
2026-11-18

Ford Ranger SuperCab By Year

1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2019 2020 2021 2022 2023

Other Ford Models

Aerostar Passenger Crown Victoria E-350 E-Transit 350 Cargo Van E150 Super Duty Cargo E150 Super Duty Passenger Econoline E150 Cargo Econoline E350 Super Duty Passenger Expedition MAX Explorer Sport F-600 F250 Regular Cab F250 Super Duty Super Cab F350 Super Cab Mustang Ranger SuperCrew Tempo Transit 150 Crew Van Transit 350 HD Cargo Van Transit Connect Cargo

Popular Vehicle Fitment

▶ Ford Mustang Specs ▶ Chevy Tahoe Specs ▶ Honda Civic Specs ▶ Ford F-150 Specs ▶ Toyota Camry Specs

Common Bolt Patterns

▶ 5x114.3 (5x4.5") ▶ 6x139.7 (6x5.5") ▶ 5x120 ▶ 5x127 (5x5") ▶ 5x112 (European)