2008 Ford Ranger SuperCab Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2008 Ford Ranger SuperCab is 5x114.3 (5x4.5"). It has a center bore of 78.1 mm, an offset range of 12-20, and utilizes 1/2 20 (Cone seat, 19mm hex) fasteners tightened to 100 ft-lbs (135 Nm).
2008 Ford Ranger SuperCab Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 78.1 mm |
| Offset Range (ET) | 12-20 |
| Thread Size (Lug Nut / Bolt) | 1/2 20 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 19mm |
| Wheel Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2008 Ranger SuperCab — Year-Specific Fitment Context
The 2008 Ford Ranger SuperCab is in year 17 of 20 using the 5x114.3 pattern (1992–2011). Wheels from any 1992–2011 Ford Ranger SuperCab are cross-compatible with the 2008 model. Across its full production run (1992–2023), the Ranger SuperCab has also used: 6x139.7.
Ford Ranger SuperCab Bolt Pattern by Year
Looking for all generations? View the complete Ford Ranger SuperCab (1992–2023) Bolt Pattern & Generation Guide →
The table below shows how the Ranger SuperCab's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 70.5 | 12-20 |
| 1993 | 5x114.3 | 70.5 | 12-20 |
| 1994 | 5x114.3 | 70.5 | 12-20 |
| 1995 | 5x114.3 | 70.5 | 12-20 |
| 1996 | 5x114.3 | 70.3 | 12-20 |
| 1997 | 5x114.3 | 70.3 | 12-20 |
| 1998 | 5x114.3 | 70.5 | 12-20 |
| 1999 | 5x114.3 | 70.5 | 12-20 |
| 2000 | 5x114.3 | 70.5 | 12-20 |
| 2001 | 5x114.3 | 70.5 | 12-20 |
| 2002 | 5x114.3 | 70.3 | 12-20 |
| 2003 | 5x114.3 | 70.3 | 12-20 |
| 2004 | 5x114.3 | 70.3 | 12-20 |
| 2005 | 5x114.3 | 78.1 | 12-20 |
| 2006 | 5x114.3 | 78.1 | 12-20 |
| 2007 | 5x114.3 | 78.1 | 12-20 |
| ▸ 2008 | 5x114.3 | 78.1 | 12-20 |
| 2009 | 5x114.3 | 78.1 | 12-20 |
| 2010 | 5x114.3 | 78.1 | 12-20 |
| 2011 | 5x114.3 | 78.1 | 12-20 |
| 2019 | 6x139.7 | 93.1 | 55 |
| 2020 | 6x139.7 | 93.1 | 55 |
| 2021 | 6x139.7 | 93.1 | 55 |
| 2022 | 6x139.7 | 93.1 | 55 |
| 2023 | 6x139.7 | 93.1 | 55 |
2008 Ford Ranger SuperCab Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2008 Ford Ranger SuperCab, donor rims must match the 5x114.3 PCD and have a center bore of at least 78.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 78.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2006 Ford Ranger Regular Cab | 78.1 mm (Exact) | 12-20 | 1/2 20 (Cone) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2002 Toyota 4Runner | 106.1 mm | 106.1mm → 78.1mm |
12 |
| 1994 Ford Explorer | 87.1 mm | 87.1mm → 78.1mm |
44 |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Ford Ranger SuperCab — Frequently Asked Questions
What is the bolt pattern for a 2008 Ford Ranger SuperCab?
The 2008 Ford Ranger SuperCab uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 78.1mm and the offset is 12-20mm.
What other years of Ford Ranger SuperCab have the same bolt pattern as the 2008?
The Ford Ranger SuperCab uses the 5x114.3 pattern from 1992 through 2011. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
What does 12-20mm offset mean for the 2008 Ranger SuperCab?
An offset of 12-20mm means the wheel's mounting surface is 12-20mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ford.
What is the factory wheel offset for a 2008 Ford Ranger SuperCab?
The OEM offset for the 2008 Ranger SuperCab is typically around 12-20mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I put aftermarket wheels on my 2008 Ford Ranger SuperCab?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 12-20mm, and a center bore of at least 78.1mm (using hub rings if larger).
Why is matching the 78.1mm center bore important for the 2008 Ranger SuperCab?
The 78.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →