1993 Ford Ranger SuperCab Bolt Pattern

Quick Answer: The factory bolt pattern (lug pattern) for a 1993 Ford Ranger SuperCab is 5x114.3 (5x4.5"). It has a center bore of 70.5 mm, an offset range of 12-20, and utilizes 1/2 20 (Cone seat, 19mm hex) fasteners tightened to 100 ft-lbs (135 Nm).

1993 Ford Ranger SuperCab Wheel Fitment Specs

Bolt Pattern (Lug Pattern) 5x114.3 (5x4.5")
Center Bore (Hub Bore) 70.5 mm
Offset Range (ET) 12-20
Thread Size (Lug Nut / Bolt) 1/2 20
Fastener Seat Type Conical 60° (Cone / Tapered)
Lug Wrench / Socket Hex Size 19mm
Wheel Torque Specs 100 ft-lbs (135 Nm)
💡

Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.

🛠️ Managing a shop, wheel inventory, or app? Stop searching one by one.
Download 12,902 Vehicle Database (CSV) →
🔍 Check fitment for other vehicles using our Ultimate Bolt Pattern Finder tool →

1993 Ranger SuperCab — Year-Specific Fitment Context

The 1993 Ford Ranger SuperCab is in year 2 of 20 using the 5x114.3 pattern (1992–2011). Wheels from any 1992–2011 Ford Ranger SuperCab are cross-compatible with the 1993 model. Across its full production run (1992–2023), the Ranger SuperCab has also used: 6x139.7.

Ford Ranger SuperCab Bolt Pattern by Year

Looking for all generations? View the complete Ford Ranger SuperCab (1992–2023) Bolt Pattern & Generation Guide →

The table below shows how the Ranger SuperCab's wheel specifications have changed over the years. The 1993 model year is highlighted.

Year Bolt Pattern Center Bore Offset
1992 5x114.3 70.5 12-20
▸ 1993 5x114.3 70.5 12-20
1994 5x114.3 70.5 12-20
1995 5x114.3 70.5 12-20
1996 5x114.3 70.3 12-20
1997 5x114.3 70.3 12-20
1998 5x114.3 70.5 12-20
1999 5x114.3 70.5 12-20
2000 5x114.3 70.5 12-20
2001 5x114.3 70.5 12-20
2002 5x114.3 70.3 12-20
2003 5x114.3 70.3 12-20
2004 5x114.3 70.3 12-20
2005 5x114.3 78.1 12-20
2006 5x114.3 78.1 12-20
2007 5x114.3 78.1 12-20
2008 5x114.3 78.1 12-20
2009 5x114.3 78.1 12-20
2010 5x114.3 78.1 12-20
2011 5x114.3 78.1 12-20
2019 6x139.7 93.1 55
2020 6x139.7 93.1 55
2021 6x139.7 93.1 55
2022 6x139.7 93.1 55
2023 6x139.7 93.1 55

1993 Ford Ranger SuperCab Wheel Interchange & Donor Fitment Guide (5x114.3)

The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 1993 Ford Ranger SuperCab, donor rims must match the 5x114.3 PCD and have a center bore of at least 70.5 mm:

DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 70.5mm Center Bore (No Hub Rings Needed)

Compatible Donor Vehicle Center Bore OEM Offset (ET) Lug Thread & Seat
2024 Lincoln Aviator 70.5 mm (Exact) 50 14x1.5 (Cone)
1995 Lincoln Continental 70.5 mm (Exact) 40 N 12x1.50 (Cone)
1995 Lincoln Town Car 70.5 mm (Exact) 10 N 1/2" (Cone)
1994 Mercury Grand Marquis 70.5 mm (Exact) 0-40 1/2 20 (Cone)
2003 Mercury Sable 70.5 mm (Exact) 40 12x1.5 (Cone)

HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)

Donor Vehicle Donor Bore Required Hub Ring (OD → ID) OEM Offset (ET)
1997 Jeep Wrangler 71.6 mm 71.6mm → 70.5mm 25
2021 Maserati Quattroporte 78.1 mm 78.1mm → 70.5mm 45
2002 Toyota 4Runner 106.1 mm 106.1mm → 70.5mm 12
Looking for all models? View the complete directory of vehicles with 5x114.3 bolt pattern →

Quick Tips & Safety Warnings

Ready to upgrade or perform maintenance?

🛒 Shop Tools & Accessories on Amazon

As an Amazon Associate, I earn from qualifying purchases.

1993 Ford Ranger SuperCab — Frequently Asked Questions

What is the bolt pattern for a 1993 Ford Ranger SuperCab?

The 1993 Ford Ranger SuperCab uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 70.5mm and the offset is 12-20mm.

What other years of Ford Ranger SuperCab have the same bolt pattern as the 1993?

The Ford Ranger SuperCab uses the 5x114.3 pattern from 1992 through 2011. Wheels from any of these model years are dimensionally compatible with the 1993, provided the offset and center bore also match.

What is the PCD for a 1993 Ford Ranger SuperCab?

PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1993 Ranger SuperCab, the PCD is 5x114.3.

What is the factory wheel offset for a 1993 Ford Ranger SuperCab?

The OEM offset for the 1993 Ranger SuperCab is typically around 12-20mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.

Can I put aftermarket wheels on my 1993 Ford Ranger SuperCab?

Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 12-20mm, and a center bore of at least 70.5mm (using hub rings if larger).

What does 12-20mm offset mean for the 1993 Ranger SuperCab?

An offset of 12-20mm means the wheel's mounting surface is 12-20mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ford.

For Tire & Wheel Shops, Shopify Stores & Developers

Running a Tire Shop or Wheel Store?

Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.

Get Master Spreadsheet (CSV) →
Confidence Level
Medium
Verified Source
Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last Updated
2026-11-18

Ford Ranger SuperCab By Year

1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2019 2020 2021 2022 2023

Other Ford Models

E-Transit 350 Cargo Van Expedition Explorer Sport Trac F-150 F-350 F-650 F-750 F250 Regular Cab F350 Super Cab F350 Super Duty Regular Cab Festiva Probe Transit Transit 150 Passenger Van Transit 150 Van Transit 150 Wagon Transit 350 Crew Van Transit 350 Wagon Transit Connect Cargo Transit Connect Passenger Wagon

Popular Vehicle Fitment

▶ Ford Mustang Specs ▶ Chevy Tahoe Specs ▶ Honda Civic Specs ▶ Ford F-150 Specs ▶ Toyota Camry Specs

Common Bolt Patterns

▶ 5x114.3 (5x4.5") ▶ 6x139.7 (6x5.5") ▶ 5x120 ▶ 5x127 (5x5") ▶ 5x112 (European)