2010 Ford Transit Connect Cargo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Ford Transit Connect Cargo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x160 |
|---|---|
| Lug Nut / Bolt Size | N 14x2.00 |
| Center Bore (CB) | 65.1 mm |
| Offset (ET) | 60 |
| Torque Specs | 150 ft-lbs (204 Nm) |
2010 Transit Connect Cargo — Year-Specific Fitment Context
The 2010 model year marks the beginning of the Ford Transit Connect Cargo's 5x160 bolt pattern era, which continued through 2018 (9 consecutive years). Wheels from any 2010–2018 Ford Transit Connect Cargo are cross-compatible with the 2010 model. Across its full production run (2010–2019), the Transit Connect Cargo has also used: 5x108.
Ford Transit Connect Cargo Bolt Pattern by Year
The table below shows how the Transit Connect Cargo's wheel specifications have changed over the years. The 2010 model year is highlighted.
5x160 Pattern Context
This bolt pattern appears on 80 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 5x160:
Expert Buying Guide for 2010 Ford Transit Connect Cargo
For your 2010 Ford Transit Connect Cargo, the bolt pattern is 5x160 with a center bore of 65.1mm. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration and ensure proper load distribution. The offset is critical: stock is 60mm, and deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (14x2.00) and seat type (conical/60-degree). Never mix seat types; improper seating can lead to wheel loss. Re-torque lug nuts after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Ford Transit Connect Cargo appears from 2010 to 2019 (10 model years). Across model years, this model appears with 2 bolt patterns (5x108, 5x160).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 10.0 mm
Quick Tips & Safety Warnings
- ✅ Always re-torque lug nuts to manufacturer specifications (typically 100-110 ft-lbs) after 50-100 miles.
- ✅ Verify wheel hub bore is at least 65.1mm; use hub-centric rings if larger to avoid vibration.
- ✅ Check offset carefully: using wheels with offset lower than 55mm may cause inner tire rubbing on suspension components.
- ⚠️ Torque lugs in a star pattern to 150 ft-lbs (204 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Ford Transit Connect Cargo — Frequently Asked Questions
What is the bolt pattern for a 2010 Ford Transit Connect Cargo?
The 2010 Ford Transit Connect Cargo uses a 5x160 bolt pattern (also called lug pattern or PCD). The center bore is 65.1mm and the offset is 60mm.
What other years of Ford Transit Connect Cargo have the same bolt pattern as the 2010?
The Ford Transit Connect Cargo uses the 5x160 pattern from 2010 through 2018. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
Can I use spacers on my 2010 Ford Transit Connect Cargo?
Yes, but ensure the wheel spacers match the 5x160 bolt pattern and 65.1mm center bore. Also verify that you have enough thread engagement for your N 14x2.00 hardware.
How do I measure the bolt pattern on my 2010 Ford?
The 2010 Transit Connect Cargo uses a 5x160 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 2010 Ford Transit Connect Cargo?
The factory center bore (hub bore) for the 2010 Ford Transit Connect Cargo is 65.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the factory wheel offset for a 2010 Ford Transit Connect Cargo?
The OEM offset for the 2010 Transit Connect Cargo is typically around 60mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset