2025 Freightliner Condor Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2025 Freightliner Condor, along with offset and center bore data.
2025 Freightliner Condor Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 10x285.75 |
|---|---|
| Lug Nut / Bolt Size | 22x1.5 |
| Center Bore (CB) | 220 mm |
| Offset (ET) | Not Applicable |
| Torque Specs | 450-500 ft-lbs (610-678 Nm) |
2025 Condor — Year-Specific Fitment Context
The 2025 is the only model year of the Freightliner Condor in our database using the 10x285.75 bolt pattern.
10x285.75 Pattern Context
This bolt pattern appears on 149 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 10x285.75:
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 450-500 ft-lbs (610-678 Nm), then re-check torque after 50-100 km (30-60 miles).
2025 Freightliner Condor — Frequently Asked Questions
What is the bolt pattern for a 2025 Freightliner Condor?
The 2025 Freightliner Condor uses a 10x285.75 bolt pattern (also called lug pattern or PCD). The center bore is 220mm and the offset is Not Applicablemm.
How do I measure the bolt pattern on my 2025 Freightliner?
The 2025 Condor uses a 10x285.75 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I use spacers on my 2025 Freightliner Condor?
Yes, but ensure the wheel spacers match the 10x285.75 bolt pattern and 220mm center bore. Also verify that you have enough thread engagement for your 22x1.5 hardware.
Can I put aftermarket wheels on my 2025 Freightliner Condor?
Absolutely. Just ensure the aftermarket wheels have a 10x285.75 bolt pattern, an offset near Not Applicablemm, and a center bore of at least 220mm (using hub rings if larger).
How tight should I torque the lug nuts on a 2025 Freightliner Condor?
Refer to your owner's manual for exact specs, but always tighten the 22x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What does Not Applicablemm offset mean for the 2025 Condor?
An offset of Not Applicablemm means the wheel's mounting surface is Not Applicablemm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Freightliner.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset