2026 Freightliner Condor Bolt Pattern

Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Freightliner Condor is 10x285.75. It has a center bore of 220 mm, an offset range of Not Applicable, and utilizes 22x1.5 (Cone seat, 33mm hex) fasteners tightened to 450-500 ft-lbs (610-678 Nm).

2026 Freightliner Condor Wheel Fitment Specs

Bolt Pattern (Lug Pattern) 10x285.75
Center Bore (Hub Bore) 220 mm
Offset Range (ET) Not Applicable
Thread Size (Lug Nut / Bolt) 22x1.5
Fastener Seat Type Conical 60° (Cone / Tapered)
Lug Wrench / Socket Hex Size 33mm
Wheel Torque Specs 450-500 ft-lbs (610-678 Nm)
🛠️ Managing a shop, wheel inventory, or app? Stop searching one by one.
Download 12,902 Vehicle Database (CSV) →
🔍 Check fitment for other vehicles using our Ultimate Bolt Pattern Finder tool →

2026 Condor — Year-Specific Fitment Context

The 2026 model year is the final year of the Freightliner Condor's 10x285.75 bolt pattern run (since 2025). Wheels from any 2025–2026 Freightliner Condor are cross-compatible with the 2026 model.

Freightliner Condor Bolt Pattern by Year

Looking for all generations? View the complete Freightliner Condor (2025–2026) Bolt Pattern & Generation Guide →

The table below shows how the Condor's wheel specifications have changed over the years. The 2026 model year is highlighted.

Year Bolt Pattern Center Bore Offset
2025 10x285.75 220 Not Applicable
▸ 2026 10x285.75 220 Not Applicable

2026 Freightliner Condor Wheel Interchange & Donor Fitment Guide (10x285.75)

The 10x285.75 bolt pattern is shared by 218 vehicles in our database (moderately common). For safe wheel swaps on the 2026 Freightliner Condor, donor rims must match the 10x285.75 PCD and have a center bore of at least 220 mm:

DIRECT HUB MATCH Same 10x285.75 Pattern & Exact 220mm Center Bore (No Hub Rings Needed)

Compatible Donor Vehicle Center Bore OEM Offset (ET) Lug Thread & Seat
2024 Freightliner CST120 220 mm (Exact) Not Applicable 22x1.5 (Cone)
2024 Freightliner eCascadia 220 mm (Exact) Not Applicable 22x1.5 (Cone)
2024 Freightliner eM2 106 220 mm (Exact) Not Applicable 22x1.5 (Flat)
2024 Freightliner FB 65 Chassis 220 mm (Exact) Not Applicable 22x1.5 (Flat)
2024 Freightliner FL106 220.1 mm (Exact) Not Applicable 22x1.5 (Cone)
2024 Freightliner FL112 220 mm (Exact) Not Applicable 22x1.5 (Cone)

HUB RING FITMENT Same 10x285.75 Pattern with Larger Center Bore (Hub-Centric Ring Required)

Donor Vehicle Donor Bore Required Hub Ring (OD → ID) OEM Offset (ET)
2024 Freightliner EF Front Engine Bus Chassis 221.1 mm 221.1mm → 220mm Not Applicable
2024 Freightliner EFX Front Engine Bus Chassis 222 mm 222mm → 220mm Not Applicable
2024 Freightliner MD109 222 mm 222mm → 220mm Not Applicable
2024 Freightliner NGE (956) Platform Truck COE 221 mm 221mm → 220mm Not Applicable
2024 Freightliner S2 106 Bus Chassis 221.1 mm 221.1mm → 220mm Not Applicable
2024 Volvo VAH 221 mm 221mm → 220mm Not Applicable
Looking for all models? View the complete directory of vehicles with 10x285.75 bolt pattern →

Quick Tips & Safety Warnings

Ready to upgrade or perform maintenance?

🛒 Shop Tools & Accessories on Amazon

As an Amazon Associate, I earn from qualifying purchases.

2026 Freightliner Condor — Frequently Asked Questions

What is the bolt pattern for a 2026 Freightliner Condor?

The 2026 Freightliner Condor uses a 10x285.75 bolt pattern (also called lug pattern or PCD). The center bore is 220mm and the offset is Not Applicablemm.

What other years of Freightliner Condor have the same bolt pattern as the 2026?

The Freightliner Condor uses the 10x285.75 pattern from 2025 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.

How tight should I torque the lug nuts on a 2026 Freightliner Condor?

Refer to your owner's manual for exact specs, but always tighten the 22x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.

What is the factory wheel offset for a 2026 Freightliner Condor?

The OEM offset for the 2026 Condor is typically around Not Applicablemm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.

Can I put aftermarket wheels on my 2026 Freightliner Condor?

Absolutely. Just ensure the aftermarket wheels have a 10x285.75 bolt pattern, an offset near Not Applicablemm, and a center bore of at least 220mm (using hub rings if larger).

Can I use spacers on my 2026 Freightliner Condor?

Yes, but ensure the wheel spacers match the 10x285.75 bolt pattern and 220mm center bore. Also verify that you have enough thread engagement for your 22x1.5 hardware.

For Tire & Wheel Shops, Shopify Stores & Developers

Running a Tire Shop or Wheel Store?

Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.

Get Master Spreadsheet (CSV) →
Confidence Level
Medium
Verified Source
Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last Updated
2026-11-18

Freightliner Condor By Year

2025 2026

Other Freightliner Models

B2 106 Electric Conventional Chassis B2 Bus Chassis Classic EF Front Engine Bus Chassis MC 45 Chassis MC Front Engine Motor Home Chassis MT 35 Chassis MT45EV S2LG 106 Sport Chassis Sprinter 1500 Cargo Sprinter 2500 Passenger Sprinter 4500 Crew Sprinter WORKER Cargo XBR Rail Rear Engine Shuttle Bus Chassis XC Formed Rail Rear Engine Motor Home Chassis XC Raised Rail Rear Engine Motor Home Chassis XC-L Lowered Rail Rear Engine Motor Home Chassis XC-M Modular Rail Rear Engine Motor Home Chassis XC-S Straight Rail Rear Engine Motor Home Chassis

Popular Vehicle Fitment

▶ Ford Mustang Specs ▶ Chevy Tahoe Specs ▶ Honda Civic Specs ▶ Ford F-150 Specs ▶ Toyota Camry Specs

Common Bolt Patterns

▶ 5x114.3 (5x4.5") ▶ 6x139.7 (6x5.5") ▶ 5x120 ▶ 5x127 (5x5") ▶ 5x112 (European)