2025 Freightliner FL60 Bolt Pattern

Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Freightliner FL60 is 10x285.75. It has a center bore of 220 mm, an offset range of Not Applicable, and utilizes 22x1.5 (Flat seat, 33mm hex) fasteners tightened to 450-500 ft-lbs (610-678 Nm).

2025 Freightliner FL60 Wheel Fitment Specs

Bolt Pattern (Lug Pattern) 10x285.75
Center Bore (Hub Bore) 220 mm
Offset Range (ET) Not Applicable
Thread Size (Lug Nut / Bolt) 22x1.5
Fastener Seat Type Flat / Mag Seat (Washer)
Lug Wrench / Socket Hex Size 33mm
Wheel Torque Specs 450-500 ft-lbs (610-678 Nm)
🛠️ Managing a shop, wheel inventory, or app? Stop searching one by one.
Download 12,902 Vehicle Database (CSV) →
🔍 Check fitment for other vehicles using our Ultimate Bolt Pattern Finder tool →

2025 FL60 — Year-Specific Fitment Context

The 2025 Freightliner FL60 is in year 2 of 3 using the 10x285.75 pattern (2024–2026). Wheels from any 2024–2026 Freightliner FL60 are cross-compatible with the 2025 model.

Freightliner FL60 Bolt Pattern by Year

Looking for all generations? View the complete Freightliner FL60 (2024–2026) Bolt Pattern & Generation Guide →

The table below shows how the FL60's wheel specifications have changed over the years. The 2025 model year is highlighted.

Year Bolt Pattern Center Bore Offset
2024 10x285.75 220 Not Applicable
▸ 2025 10x285.75 220 Not Applicable
2026 10x285.75 220 Not Applicable

2025 Freightliner FL60 Wheel Interchange & Donor Fitment Guide (10x285.75)

The 10x285.75 bolt pattern is shared by 218 vehicles in our database (moderately common). For safe wheel swaps on the 2025 Freightliner FL60, donor rims must match the 10x285.75 PCD and have a center bore of at least 220 mm:

DIRECT HUB MATCH Same 10x285.75 Pattern & Exact 220mm Center Bore (No Hub Rings Needed)

Compatible Donor Vehicle Center Bore OEM Offset (ET) Lug Thread & Seat
2024 Freightliner OMC Chassis 220.1 mm (Exact) Not Applicable 22x1.5 (Cone)
2024 Freightliner RA Cascadia 220.1 mm (Exact) Not Applicable 22x1.5 (Flat)
2024 Freightliner S2C 106 Conventional Cab & Chassis 220.1 mm (Exact) Not Applicable 22x1.5 (Cone)
2024 Freightliner S2G Conventional Full Cab and Chassis 220.1 mm (Exact) Not Applicable 22x1.5 (Flat)
2025 Freightliner S2LG 106 220 mm (Exact) Not Applicable M22x1.5 (Flat)
2024 Freightliner S2RV 106 Conventional cab & Chassis 220 mm (Exact) Not Applicable 22x1.5 (Flat)

HUB RING FITMENT Same 10x285.75 Pattern with Larger Center Bore (Hub-Centric Ring Required)

Donor Vehicle Donor Bore Required Hub Ring (OD → ID) OEM Offset (ET)
2024 Freightliner NGE (956) Platform Truck COE 221 mm 221mm → 220mm Not Applicable
2024 Freightliner S2 106 Bus Chassis 221.1 mm 221.1mm → 220mm Not Applicable
2024 Volvo VAH 221 mm 221mm → 220mm Not Applicable
2024 Volvo VHD 222 mm 222mm → 220mm Not Applicable
2024 Chevrolet 6500XD 222 mm 222mm → 220mm Not Applicable
2024 Freightliner EF Front Engine Bus Chassis 221.1 mm 221.1mm → 220mm Not Applicable
Looking for all models? View the complete directory of vehicles with 10x285.75 bolt pattern →

Quick Tips & Safety Warnings

Ready to upgrade or perform maintenance?

🛒 Shop Tools & Accessories on Amazon

As an Amazon Associate, I earn from qualifying purchases.

2025 Freightliner FL60 — Frequently Asked Questions

What is the bolt pattern for a 2025 Freightliner FL60?

The 2025 Freightliner FL60 uses a 10x285.75 bolt pattern (also called lug pattern or PCD). The center bore is 220mm and the offset is Not Applicablemm.

What other years of Freightliner FL60 have the same bolt pattern as the 2025?

The Freightliner FL60 uses the 10x285.75 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.

How tight should I torque the lug nuts on a 2025 Freightliner FL60?

Refer to your owner's manual for exact specs, but always tighten the 22x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.

What is the PCD for a 2025 Freightliner FL60?

PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2025 FL60, the PCD is 10x285.75.

What is the factory wheel offset for a 2025 Freightliner FL60?

The OEM offset for the 2025 FL60 is typically around Not Applicablemm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.

Do 2025 Freightliner FL60s use lug bolts or lug nuts?

The 2025 FL60 requires 22x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.

For Tire & Wheel Shops, Shopify Stores & Developers

Running a Tire Shop or Wheel Store?

Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.

Get Master Spreadsheet (CSV) →
Confidence Level
Medium
Verified Source
Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last Updated
2026-11-18

Freightliner FL60 By Year

2024 2025 2026

Other Freightliner Models

114SD B2G 106 Columbia FB 65 Chassis FL112 FLB FLS112 Legacy M-B MBO Chassis MC Front Engine Motor Home Chassis MCL Front Engine Motor Home Chassis MT 35 Chassis NGE (956) Platform Truck COE S2C 106 Conventional Cab & Chassis Sprinter Sprinter 3500 Crew Sprinter 3500 XD Crew Sprinter 3500XD Cargo Sprinter WORKER Cargo XC Formed Rail Rear Engine Motor Home Chassis XC-F Formed Rail Rear Engine Motor Home Chassis

Popular Vehicle Fitment

▶ Ford Mustang Specs ▶ Chevy Tahoe Specs ▶ Honda Civic Specs ▶ Ford F-150 Specs ▶ Toyota Camry Specs

Common Bolt Patterns

▶ 5x114.3 (5x4.5") ▶ 6x139.7 (6x5.5") ▶ 5x120 ▶ 5x127 (5x5") ▶ 5x112 (European)