2024 Freightliner S2G Conventional Full Cab and Chassis Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Freightliner S2G Conventional Full Cab and Chassis, along with offset and center bore data.
2024 Freightliner S2G Conventional Full Cab and Chassis Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 10x285.75 |
|---|---|
| Lug Nut / Bolt Size | 22x1.5 |
| Center Bore (CB) | 220.1 mm |
| Offset (ET) | Not Applicable |
| Torque Specs | 450-500 ft-lbs (610-678 Nm) |
2024 S2G Conventional Full Cab and Chassis — Year-Specific Fitment Context
The 2024 model year marks the beginning of the Freightliner S2G Conventional Full Cab and Chassis's 10x285.75 bolt pattern era, which continued through 2025 (2 consecutive years). Wheels from any 2024–2025 Freightliner S2G Conventional Full Cab and Chassis are cross-compatible with the 2024 model.
Freightliner S2G Conventional Full Cab and Chassis Bolt Pattern by Year
The table below shows how the S2G Conventional Full Cab and Chassis's wheel specifications have changed over the years. The 2024 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 2024 | 10x285.75 | 220.1 | Not Applicable |
| 2025 | 10x285.75 | 220.1 | Not Applicable |
10x285.75 Pattern Context
This bolt pattern appears on 149 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 10x285.75:
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 450-500 ft-lbs (610-678 Nm), then re-check torque after 50-100 km (30-60 miles).
2024 Freightliner S2G Conventional Full Cab and Chassis — Frequently Asked Questions
What is the bolt pattern for a 2024 Freightliner S2G Conventional Full Cab and Chassis?
The 2024 Freightliner S2G Conventional Full Cab and Chassis uses a 10x285.75 bolt pattern (also called lug pattern or PCD). The center bore is 220.1mm and the offset is Not Applicablemm.
What other years of Freightliner S2G Conventional Full Cab and Chassis have the same bolt pattern as the 2024?
The Freightliner S2G Conventional Full Cab and Chassis uses the 10x285.75 pattern from 2024 through 2025. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
What is the factory wheel offset for a 2024 Freightliner S2G Conventional Full Cab and Chassis?
The OEM offset for the 2024 S2G Conventional Full Cab and Chassis is typically around Not Applicablemm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the center bore of a 2024 Freightliner S2G Conventional Full Cab and Chassis?
The factory center bore (hub bore) for the 2024 Freightliner S2G Conventional Full Cab and Chassis is 220.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What lug nut size does the 2024 Freightliner S2G Conventional Full Cab and Chassis use?
The 2024 Freightliner S2G Conventional Full Cab and Chassis uses 22x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I use spacers on my 2024 Freightliner S2G Conventional Full Cab and Chassis?
Yes, but ensure the wheel spacers match the 10x285.75 bolt pattern and 220.1mm center bore. Also verify that you have enough thread engagement for your 22x1.5 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset