2025 Freightliner S2G Conventional Full Cab and Chassis Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2025 Freightliner S2G Conventional Full Cab and Chassis, along with offset and center bore data.
2025 Freightliner S2G Conventional Full Cab and Chassis Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 10x285.75 |
|---|---|
| Lug Nut / Bolt Size | 22x1.5 |
| Center Bore (CB) | 220.1 mm |
| Offset (ET) | Not Applicable |
| Torque Specs | 450-500 ft-lbs (610-678 Nm) |
2025 S2G Conventional Full Cab and Chassis — Year-Specific Fitment Context
The 2025 model year is the final year of the Freightliner S2G Conventional Full Cab and Chassis's 10x285.75 bolt pattern run (since 2024). Wheels from any 2024–2025 Freightliner S2G Conventional Full Cab and Chassis are cross-compatible with the 2025 model.
Freightliner S2G Conventional Full Cab and Chassis Bolt Pattern by Year
The table below shows how the S2G Conventional Full Cab and Chassis's wheel specifications have changed over the years. The 2025 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2024 | 10x285.75 | 220.1 | Not Applicable |
| ▸ 2025 | 10x285.75 | 220.1 | Not Applicable |
10x285.75 Pattern Context
This bolt pattern appears on 149 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 10x285.75:
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 450-500 ft-lbs (610-678 Nm), then re-check torque after 50-100 km (30-60 miles).
2025 Freightliner S2G Conventional Full Cab and Chassis — Frequently Asked Questions
What is the bolt pattern for a 2025 Freightliner S2G Conventional Full Cab and Chassis?
The 2025 Freightliner S2G Conventional Full Cab and Chassis uses a 10x285.75 bolt pattern (also called lug pattern or PCD). The center bore is 220.1mm and the offset is Not Applicablemm.
What other years of Freightliner S2G Conventional Full Cab and Chassis have the same bolt pattern as the 2025?
The Freightliner S2G Conventional Full Cab and Chassis uses the 10x285.75 pattern from 2024 through 2025. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2025 Freightliner S2G Conventional Full Cab and Chassis?
Absolutely. Just ensure the aftermarket wheels have a 10x285.75 bolt pattern, an offset near Not Applicablemm, and a center bore of at least 220.1mm (using hub rings if larger).
Do 2025 Freightliner S2G Conventional Full Cab and Chassiss use lug bolts or lug nuts?
The 2025 S2G Conventional Full Cab and Chassis requires 22x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How tight should I torque the lug nuts on a 2025 Freightliner S2G Conventional Full Cab and Chassis?
Refer to your owner's manual for exact specs, but always tighten the 22x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I use spacers on my 2025 Freightliner S2G Conventional Full Cab and Chassis?
Yes, but ensure the wheel spacers match the 10x285.75 bolt pattern and 220.1mm center bore. Also verify that you have enough thread engagement for your 22x1.5 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset