2026 Freightliner S2G Conventional Full Cab and Chassis Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Freightliner S2G Conventional Full Cab and Chassis is 10x285.75. It has a center bore of 220.1 mm, an offset range of Not Applicable, and utilizes 22x1.5 (Flat seat, 33mm hex) fasteners tightened to 450-500 ft-lbs (610-678 Nm).
2026 Freightliner S2G Conventional Full Cab and Chassis Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 10x285.75 |
|---|---|
| Center Bore (Hub Bore) | 220.1 mm |
| Offset Range (ET) | Not Applicable |
| Thread Size (Lug Nut / Bolt) | 22x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 33mm |
| Wheel Torque Specs | 450-500 ft-lbs (610-678 Nm) |
2026 S2G Conventional Full Cab and Chassis — Year-Specific Fitment Context
The 2026 model year is the final year of the Freightliner S2G Conventional Full Cab and Chassis's 10x285.75 bolt pattern run (since 2024). Wheels from any 2024–2026 Freightliner S2G Conventional Full Cab and Chassis are cross-compatible with the 2026 model.
Freightliner S2G Conventional Full Cab and Chassis Bolt Pattern by Year
Looking for all generations? View the complete Freightliner S2G Conventional Full Cab and Chassis (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the S2G Conventional Full Cab and Chassis's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Freightliner S2G Conventional Full Cab and Chassis Wheel Interchange & Donor Fitment Guide (10x285.75)
The 10x285.75 bolt pattern is shared by 218 vehicles in our database (moderately common). For safe wheel swaps on the 2026 Freightliner S2G Conventional Full Cab and Chassis, donor rims must match the 10x285.75 PCD and have a center bore of at least 220.1 mm:
DIRECT HUB MATCH Same 10x285.75 Pattern & Exact 220.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2026 Volvo VNL (4) | 220 mm (Exact) | Not Applicable | 22x1.5 (Flat) |
| 2024 Volvo VNM | 220.1 mm (Exact) | Not Applicable | 22x1.5 (Cone) |
| 2024 Volvo VNR | 220.1 mm (Exact) | Not Applicable | 22x1.5 (Flat) |
| 2025 Volvo VNR (4) | 220 mm (Exact) | Not Applicable | 22x1.5 (Flat) |
| 2024 Volvo VNX | 220 mm (Exact) | Not Applicable | 22x1.5 (Flat) |
| 2024 Freightliner 108SD | 220.1 mm (Exact) | Not Applicable | 22x1.5 (Cone) |
HUB RING FITMENT Same 10x285.75 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2024 Chevrolet 6500XD | 222 mm | 222mm → 220.1mm |
Not Applicable |
| 2024 Freightliner EF Front Engine Bus Chassis | 221.1 mm | 221.1mm → 220.1mm |
Not Applicable |
| 2024 Freightliner EFX Front Engine Bus Chassis | 222 mm | 222mm → 220.1mm |
Not Applicable |
| 2024 Freightliner MD109 | 222 mm | 222mm → 220.1mm |
Not Applicable |
| 2024 Freightliner NGE (956) Platform Truck COE | 221 mm | 221mm → 220.1mm |
Not Applicable |
| 2024 Freightliner S2 106 Bus Chassis | 221.1 mm | 221.1mm → 220.1mm |
Not Applicable |
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 450-500 ft-lbs (610-678 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Freightliner S2G Conventional Full Cab and Chassis — Frequently Asked Questions
What is the bolt pattern for a 2026 Freightliner S2G Conventional Full Cab and Chassis?
The 2026 Freightliner S2G Conventional Full Cab and Chassis uses a 10x285.75 bolt pattern (also called lug pattern or PCD). The center bore is 220.1mm and the offset is Not Applicablemm.
What other years of Freightliner S2G Conventional Full Cab and Chassis have the same bolt pattern as the 2026?
The Freightliner S2G Conventional Full Cab and Chassis uses the 10x285.75 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
What does Not Applicablemm offset mean for the 2026 S2G Conventional Full Cab and Chassis?
An offset of Not Applicablemm means the wheel's mounting surface is Not Applicablemm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Freightliner.
Can I use spacers on my 2026 Freightliner S2G Conventional Full Cab and Chassis?
Yes, but ensure the wheel spacers match the 10x285.75 bolt pattern and 220.1mm center bore. Also verify that you have enough thread engagement for your 22x1.5 hardware.
Do 2026 Freightliner S2G Conventional Full Cab and Chassiss use lug bolts or lug nuts?
The 2026 S2G Conventional Full Cab and Chassis requires 22x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the factory wheel offset for a 2026 Freightliner S2G Conventional Full Cab and Chassis?
The OEM offset for the 2026 S2G Conventional Full Cab and Chassis is typically around Not Applicablemm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →