2026 Freightliner FL60 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Freightliner FL60 is 10x285.75. It has a center bore of 220 mm, an offset range of Not Applicable, and utilizes 22x1.5 (Flat seat, 33mm hex) fasteners tightened to 450-500 ft-lbs (610-678 Nm).
2026 Freightliner FL60 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 10x285.75 |
|---|---|
| Center Bore (Hub Bore) | 220 mm |
| Offset Range (ET) | Not Applicable |
| Thread Size (Lug Nut / Bolt) | 22x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 33mm |
| Wheel Torque Specs | 450-500 ft-lbs (610-678 Nm) |
2026 FL60 — Year-Specific Fitment Context
The 2026 model year is the final year of the Freightliner FL60's 10x285.75 bolt pattern run (since 2024). Wheels from any 2024–2026 Freightliner FL60 are cross-compatible with the 2026 model.
Freightliner FL60 Bolt Pattern by Year
Looking for all generations? View the complete Freightliner FL60 (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the FL60's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Freightliner FL60 Wheel Interchange & Donor Fitment Guide (10x285.75)
The 10x285.75 bolt pattern is shared by 218 vehicles in our database (moderately common). For safe wheel swaps on the 2026 Freightliner FL60, donor rims must match the 10x285.75 PCD and have a center bore of at least 220 mm:
DIRECT HUB MATCH Same 10x285.75 Pattern & Exact 220mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2024 Volvo VNL | 220 mm (Exact) | Not Applicable | 22x1.5 (Flat) |
| 2025 Volvo VNL (4) | 220 mm (Exact) | Not Applicable | 22x1.5 (Flat) |
| 2024 Volvo VNM | 220.1 mm (Exact) | Not Applicable | 22x1.5 (Cone) |
| 2024 Volvo VNR | 220.1 mm (Exact) | Not Applicable | 22x1.5 (Flat) |
| 2025 Volvo VNR (4) | 220 mm (Exact) | Not Applicable | 22x1.5 (Flat) |
| 2024 Volvo VNX | 220 mm (Exact) | Not Applicable | 22x1.5 (Flat) |
HUB RING FITMENT Same 10x285.75 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2024 Chevrolet 6500XD | 222 mm | 222mm → 220mm |
Not Applicable |
| 2024 Freightliner EF Front Engine Bus Chassis | 221.1 mm | 221.1mm → 220mm |
Not Applicable |
| 2024 Freightliner EFX Front Engine Bus Chassis | 222 mm | 222mm → 220mm |
Not Applicable |
| 2024 Freightliner MD109 | 222 mm | 222mm → 220mm |
Not Applicable |
| 2024 Freightliner NGE (956) Platform Truck COE | 221 mm | 221mm → 220mm |
Not Applicable |
| 2024 Freightliner S2 106 Bus Chassis | 221.1 mm | 221.1mm → 220mm |
Not Applicable |
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 450-500 ft-lbs (610-678 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Freightliner FL60 — Frequently Asked Questions
What is the bolt pattern for a 2026 Freightliner FL60?
The 2026 Freightliner FL60 uses a 10x285.75 bolt pattern (also called lug pattern or PCD). The center bore is 220mm and the offset is Not Applicablemm.
What other years of Freightliner FL60 have the same bolt pattern as the 2026?
The Freightliner FL60 uses the 10x285.75 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2026 Freightliner?
The 2026 FL60 uses a 10x285.75 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Do 2026 Freightliner FL60s use lug bolts or lug nuts?
The 2026 FL60 requires 22x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the factory wheel offset for a 2026 Freightliner FL60?
The OEM offset for the 2026 FL60 is typically around Not Applicablemm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Why is matching the 220mm center bore important for the 2026 FL60?
The 220mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →