2025 Freightliner MCL Front Engine Motor Home Chassis Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2025 Freightliner MCL Front Engine Motor Home Chassis, along with offset and center bore data.
2025 Freightliner MCL Front Engine Motor Home Chassis Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 10x285.75 |
|---|---|
| Lug Nut / Bolt Size | 22x1.5 |
| Center Bore (CB) | 220 mm |
| Offset (ET) | Not Applicable |
| Torque Specs | 450-500 ft-lbs (610-678 Nm) |
2025 MCL Front Engine Motor Home Chassis — Year-Specific Fitment Context
The 2025 model year is the final year of the Freightliner MCL Front Engine Motor Home Chassis's 10x285.75 bolt pattern run (since 2024). Wheels from any 2024–2025 Freightliner MCL Front Engine Motor Home Chassis are cross-compatible with the 2025 model.
Freightliner MCL Front Engine Motor Home Chassis Bolt Pattern by Year
The table below shows how the MCL Front Engine Motor Home Chassis's wheel specifications have changed over the years. The 2025 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2024 | 10x285.75 | 220.1 | Not Applicable |
| ▸ 2025 | 10x285.75 | 220 | Not Applicable |
10x285.75 Pattern Context
This bolt pattern appears on 149 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 10x285.75:
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 450-500 ft-lbs (610-678 Nm), then re-check torque after 50-100 km (30-60 miles).
2025 Freightliner MCL Front Engine Motor Home Chassis — Frequently Asked Questions
What is the bolt pattern for a 2025 Freightliner MCL Front Engine Motor Home Chassis?
The 2025 Freightliner MCL Front Engine Motor Home Chassis uses a 10x285.75 bolt pattern (also called lug pattern or PCD). The center bore is 220mm and the offset is Not Applicablemm.
What other years of Freightliner MCL Front Engine Motor Home Chassis have the same bolt pattern as the 2025?
The Freightliner MCL Front Engine Motor Home Chassis uses the 10x285.75 pattern from 2024 through 2025. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
Do 2025 Freightliner MCL Front Engine Motor Home Chassiss use lug bolts or lug nuts?
The 2025 MCL Front Engine Motor Home Chassis requires 22x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the factory wheel offset for a 2025 Freightliner MCL Front Engine Motor Home Chassis?
The OEM offset for the 2025 MCL Front Engine Motor Home Chassis is typically around Not Applicablemm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How tight should I torque the lug nuts on a 2025 Freightliner MCL Front Engine Motor Home Chassis?
Refer to your owner's manual for exact specs, but always tighten the 22x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I put aftermarket wheels on my 2025 Freightliner MCL Front Engine Motor Home Chassis?
Absolutely. Just ensure the aftermarket wheels have a 10x285.75 bolt pattern, an offset near Not Applicablemm, and a center bore of at least 220mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset