2020 Freightliner Sprinter 2500 Crew Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 Freightliner Sprinter 2500 Crew, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x130 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 84.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2020 Sprinter 2500 Crew — Year-Specific Fitment Context
The 2020 Freightliner Sprinter 2500 Crew is in year 8 of 9 using the 6x130 pattern (2013–2021). Wheels from any 2013–2021 Freightliner Sprinter 2500 Crew are cross-compatible with the 2020 model.
Freightliner Sprinter 2500 Crew Bolt Pattern by Year
The table below shows how the Sprinter 2500 Crew's wheel specifications have changed over the years. The 2020 model year is highlighted.
6x130 Pattern Context
This bolt pattern appears on 63 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x130:
Expert Buying Guide for 2020 Freightliner Sprinter 2500 Crew
The 2020 Freightliner Sprinter 2500 Crew uses a 6x130 bolt pattern with a critical 84.1mm center bore. Aftermarket wheels often have a larger bore; use hub-centric rings to prevent vibration and ensure load is on the hub, not the lugs. Offset is sensitive: stock is 50mm. Going lower (e.g., 40mm) may cause rubbing; higher (e.g., 60mm) can stress suspension. Always match the 14x1.5 thread pitch and use correct lug nut seat (cone or ball) to avoid loosening. Failure to comply risks wheel separation.
Historical Fitment Data Reference
In our dataset, Freightliner Sprinter 2500 Crew appears from 2013 to 2021 (9 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; the 84.1mm bore is vehicle-specific.
- ✅ Check for brake caliper clearance when changing offset, especially with aftermarket wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2020 Freightliner Sprinter 2500 Crew — Frequently Asked Questions
What is the bolt pattern for a 2020 Freightliner Sprinter 2500 Crew?
The 2020 Freightliner Sprinter 2500 Crew uses a 6x130 bolt pattern (also called lug pattern or PCD). The center bore is 84.1mm and the offset is 50mm.
What other years of Freightliner Sprinter 2500 Crew have the same bolt pattern as the 2020?
The Freightliner Sprinter 2500 Crew uses the 6x130 pattern from 2013 through 2021. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
Why is matching the 84.1mm center bore important for the 2020 Sprinter 2500 Crew?
The 84.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
How tight should I torque the lug nuts on a 2020 Freightliner Sprinter 2500 Crew?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What does 50mm offset mean for the 2020 Sprinter 2500 Crew?
An offset of 50mm means the wheel's mounting surface is 50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Freightliner.
What is the factory wheel offset for a 2020 Freightliner Sprinter 2500 Crew?
The OEM offset for the 2020 Sprinter 2500 Crew is typically around 50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset