2019 Freightliner Sprinter 2500 Crew Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Freightliner Sprinter 2500 Crew, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x130 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 84.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2019 Sprinter 2500 Crew — Year-Specific Fitment Context
The 2019 Freightliner Sprinter 2500 Crew is in year 7 of 9 using the 6x130 pattern (2013–2021). Wheels from any 2013–2021 Freightliner Sprinter 2500 Crew are cross-compatible with the 2019 model.
Freightliner Sprinter 2500 Crew Bolt Pattern by Year
The table below shows how the Sprinter 2500 Crew's wheel specifications have changed over the years. The 2019 model year is highlighted.
6x130 Pattern Context
This bolt pattern appears on 63 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x130:
Expert Buying Guide for 2019 Freightliner Sprinter 2500 Crew
When selecting wheels for your 2019 Freightliner Sprinter 2500 Crew, the 6x130 bolt pattern and 84.1mm center bore are critical. Aftermarket wheels often have a larger center bore; use hub-centric rings to prevent vibration and ensure proper load distribution. Offset is sensitive: the factory 50mm offset maintains suspension geometry and brake clearance. Deviating more than ±5mm may cause rubbing or handling issues. Always use lug nuts with the correct 14x1.5 thread pitch and proper seat type (cone or ball seat) matching the wheel. Incorrect lug nuts can lead to wheel loss. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Freightliner Sprinter 2500 Crew appears from 2013 to 2021 (9 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140-160 ft-lbs after 50-100 miles of driving.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibration and damage.
- ✅ Verify wheel load rating meets or exceeds the Sprinter's GVWR (typically 8,550 lbs).
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Freightliner Sprinter 2500 Crew — Frequently Asked Questions
What is the bolt pattern for a 2019 Freightliner Sprinter 2500 Crew?
The 2019 Freightliner Sprinter 2500 Crew uses a 6x130 bolt pattern (also called lug pattern or PCD). The center bore is 84.1mm and the offset is 50mm.
What other years of Freightliner Sprinter 2500 Crew have the same bolt pattern as the 2019?
The Freightliner Sprinter 2500 Crew uses the 6x130 pattern from 2013 through 2021. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2019 Freightliner Sprinter 2500 Crew?
Absolutely. Just ensure the aftermarket wheels have a 6x130 bolt pattern, an offset near 50mm, and a center bore of at least 84.1mm (using hub rings if larger).
What does 50mm offset mean for the 2019 Sprinter 2500 Crew?
An offset of 50mm means the wheel's mounting surface is 50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Freightliner.
How tight should I torque the lug nuts on a 2019 Freightliner Sprinter 2500 Crew?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the PCD for a 2019 Freightliner Sprinter 2500 Crew?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2019 Sprinter 2500 Crew, the PCD is 6x130.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset