2024 Freightliner XC-R Raised Rail Rear Engine Motor Home Chassis Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2024 Freightliner XC-R Raised Rail Rear Engine Motor Home Chassis is 10x285.75. It has a center bore of 220.1 mm, an offset range of Not Applicable, and utilizes 22x1.5 (Flat seat, 33mm hex) fasteners tightened to 450-500 ft-lbs (610-678 Nm).
2024 Freightliner XC-R Raised Rail Rear Engine Motor Home Chassis Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 10x285.75 |
|---|---|
| Center Bore (Hub Bore) | 220.1 mm |
| Offset Range (ET) | Not Applicable |
| Thread Size (Lug Nut / Bolt) | 22x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 33mm |
| Wheel Torque Specs | 450-500 ft-lbs (610-678 Nm) |
2024 XC-R Raised Rail Rear Engine Motor Home Chassis — Year-Specific Fitment Context
The 2024 model year marks the beginning of the Freightliner XC-R Raised Rail Rear Engine Motor Home Chassis's 10x285.75 bolt pattern era, which continued through 2026 (3 consecutive years). Wheels from any 2024–2026 Freightliner XC-R Raised Rail Rear Engine Motor Home Chassis are cross-compatible with the 2024 model.
Freightliner XC-R Raised Rail Rear Engine Motor Home Chassis Bolt Pattern by Year
Looking for all generations? View the complete Freightliner XC-R Raised Rail Rear Engine Motor Home Chassis (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the XC-R Raised Rail Rear Engine Motor Home Chassis's wheel specifications have changed over the years. The 2024 model year is highlighted.
2024 Freightliner XC-R Raised Rail Rear Engine Motor Home Chassis Wheel Interchange & Donor Fitment Guide (10x285.75)
The 10x285.75 bolt pattern is shared by 218 vehicles in our database (moderately common). For safe wheel swaps on the 2024 Freightliner XC-R Raised Rail Rear Engine Motor Home Chassis, donor rims must match the 10x285.75 PCD and have a center bore of at least 220.1 mm:
DIRECT HUB MATCH Same 10x285.75 Pattern & Exact 220.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2026 Freightliner MT45 Chassis | 220 mm (Exact) | Not Applicable | 22x1.5 (Cone) |
| 2024 Freightliner MT45EV | 220 mm (Exact) | Not Applicable | 22x1.5 (Cone) |
| 2024 Freightliner OMC Chassis | 220.1 mm (Exact) | Not Applicable | 22x1.5 (Cone) |
| 2024 Freightliner RA Cascadia | 220.1 mm (Exact) | Not Applicable | 22x1.5 (Flat) |
| 2024 Freightliner S2C 106 Conventional Cab & Chassis | 220.1 mm (Exact) | Not Applicable | 22x1.5 (Cone) |
| 2024 Freightliner S2G Conventional Full Cab and Chassis | 220.1 mm (Exact) | Not Applicable | 22x1.5 (Flat) |
HUB RING FITMENT Same 10x285.75 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2024 Freightliner NGE (956) Platform Truck COE | 221 mm | 221mm → 220.1mm |
Not Applicable |
| 2024 Freightliner S2 106 Bus Chassis | 221.1 mm | 221.1mm → 220.1mm |
Not Applicable |
| 2024 Volvo VAH | 221 mm | 221mm → 220.1mm |
Not Applicable |
| 2024 Volvo VHD | 222 mm | 222mm → 220.1mm |
Not Applicable |
| 2024 Chevrolet 6500XD | 222 mm | 222mm → 220.1mm |
Not Applicable |
| 2024 Freightliner EF Front Engine Bus Chassis | 221.1 mm | 221.1mm → 220.1mm |
Not Applicable |
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 450-500 ft-lbs (610-678 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Freightliner XC-R Raised Rail Rear Engine Motor Home Chassis — Frequently Asked Questions
What is the bolt pattern for a 2024 Freightliner XC-R Raised Rail Rear Engine Motor Home Chassis?
The 2024 Freightliner XC-R Raised Rail Rear Engine Motor Home Chassis uses a 10x285.75 bolt pattern (also called lug pattern or PCD). The center bore is 220.1mm and the offset is Not Applicablemm.
What other years of Freightliner XC-R Raised Rail Rear Engine Motor Home Chassis have the same bolt pattern as the 2024?
The Freightliner XC-R Raised Rail Rear Engine Motor Home Chassis uses the 10x285.75 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2024 Freightliner?
The 2024 XC-R Raised Rail Rear Engine Motor Home Chassis uses a 10x285.75 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the factory wheel offset for a 2024 Freightliner XC-R Raised Rail Rear Engine Motor Home Chassis?
The OEM offset for the 2024 XC-R Raised Rail Rear Engine Motor Home Chassis is typically around Not Applicablemm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I use spacers on my 2024 Freightliner XC-R Raised Rail Rear Engine Motor Home Chassis?
Yes, but ensure the wheel spacers match the 10x285.75 bolt pattern and 220.1mm center bore. Also verify that you have enough thread engagement for your 22x1.5 hardware.
Why is matching the 220.1mm center bore important for the 2024 XC-R Raised Rail Rear Engine Motor Home Chassis?
The 220.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →