1994 GMC 3500 Club Coupe Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1994 GMC 3500 Club Coupe, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 116.7 mm |
| Offset (ET) | 20 |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 8x165.1 is commonly referred to as 8x6.5" in US Standard.
1994 3500 Club Coupe — Year-Specific Fitment Context
The 1994 GMC 3500 Club Coupe is in year 3 of 7 using the 8x165.1 pattern (1992–1998). Wheels from any 1992–1998 GMC 3500 Club Coupe are cross-compatible with the 1994 model.
GMC 3500 Club Coupe Bolt Pattern by Year
The table below shows how the 3500 Club Coupe's wheel specifications have changed over the years. The 1994 model year is highlighted.
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
Expert Buying Guide for 1994 GMC 3500 Club Coupe
For your 1994 GMC 3500 Club Coupe, the 8x165.1 bolt pattern and 116.7mm center bore are critical. Aftermarket wheels often have a larger bore; use hub-centric rings to prevent vibration and ensure proper load transfer. The offset is sensitive—stick to 20mm ±10mm to avoid rubbing or suspension interference. Always use 14x1.5 lug nuts with the correct seat (cone or ball) matching your wheel. Improper seating can cause wheel loss. Re-torque after 50 miles. Cross-compatible with 1992–1998 models.
Historical Fitment Data Reference
In our dataset, GMC 3500 Club Coupe appears from 1992 to 1998 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lb after 50 miles of driving.
- ✅ Verify wheel bore is 116.7mm or use hub-centric rings; avoid lug-centric mounting.
- ✅ Check offset: 20mm is stock; deviations beyond ±10mm may require fender rolling or spacers.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1994 GMC 3500 Club Coupe — Frequently Asked Questions
What is the bolt pattern for a 1994 GMC 3500 Club Coupe?
The 1994 GMC 3500 Club Coupe uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 116.7mm and the offset is 20mm.
What other years of GMC 3500 Club Coupe have the same bolt pattern as the 1994?
The GMC 3500 Club Coupe uses the 8x165.1 pattern from 1992 through 1998. Wheels from any of these model years are dimensionally compatible with the 1994, provided the offset and center bore also match.
Can I put aftermarket wheels on my 1994 GMC 3500 Club Coupe?
Absolutely. Just ensure the aftermarket wheels have a 8x165.1 bolt pattern, an offset near 20mm, and a center bore of at least 116.7mm (using hub rings if larger).
Why is matching the 116.7mm center bore important for the 1994 3500 Club Coupe?
The 116.7mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Will wheels from another GMC fit my 1994 3500 Club Coupe?
Only if they share the exact same 8x165.1 bolt pattern, a compatible offset, and a center bore equal to or larger than 116.7mm.
Can I use spacers on my 1994 GMC 3500 Club Coupe?
Yes, but ensure the wheel spacers match the 8x165.1 bolt pattern and 116.7mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset