1998 GMC 3500 Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1998 GMC 3500 Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 116.7 mm |
| Offset (ET) | 20 |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 8x165.1 is commonly referred to as 8x6.5" in US Standard.
1998 3500 Regular Cab — Year-Specific Fitment Context
The 1998 GMC 3500 Regular Cab is in year 7 of 8 using the 8x165.1 pattern (1992–1999). Wheels from any 1992–1999 GMC 3500 Regular Cab are cross-compatible with the 1998 model.
GMC 3500 Regular Cab Bolt Pattern by Year
The table below shows how the 3500 Regular Cab's wheel specifications have changed over the years. The 1998 model year is highlighted.
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
Expert Buying Guide for 1998 GMC 3500 Regular Cab
For your 1998 GMC 3500 Regular Cab, the 8x165.1 bolt pattern is shared with 1992–1999 models. The critical center bore is 116.7mm; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive: stock is 20mm, but a range of 0–30mm may fit depending on tire width and suspension. Always use 14x1.5 lug nuts with the correct seat (cone or ball) matching the wheel. Mismatched seats can cause wheel loosening. Re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, GMC 3500 Regular Cab appears from 1992 to 1999 (8 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 60.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lbs after 50 miles, then check periodically.
- ✅ Ensure hub-centric rings are installed if aftermarket wheels have a larger center bore.
- ✅ Verify wheel offset with a test fit; excessive offset can cause rubbing or bearing damage.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1998 GMC 3500 Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 1998 GMC 3500 Regular Cab?
The 1998 GMC 3500 Regular Cab uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 116.7mm and the offset is 20mm.
What other years of GMC 3500 Regular Cab have the same bolt pattern as the 1998?
The GMC 3500 Regular Cab uses the 8x165.1 pattern from 1992 through 1999. Wheels from any of these model years are dimensionally compatible with the 1998, provided the offset and center bore also match.
Can I put aftermarket wheels on my 1998 GMC 3500 Regular Cab?
Absolutely. Just ensure the aftermarket wheels have a 8x165.1 bolt pattern, an offset near 20mm, and a center bore of at least 116.7mm (using hub rings if larger).
Will wheels from another GMC fit my 1998 3500 Regular Cab?
Only if they share the exact same 8x165.1 bolt pattern, a compatible offset, and a center bore equal to or larger than 116.7mm.
What lug nut size does the 1998 GMC 3500 Regular Cab use?
The 1998 GMC 3500 Regular Cab uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How do I measure the bolt pattern on my 1998 GMC?
The 1998 3500 Regular Cab uses a 8x165.1 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset