1997 GMC Savana 1500 Cargo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1997 GMC Savana 1500 Cargo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 78.1 mm |
| Offset (ET) | 20-30 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
1997 Savana 1500 Cargo — Year-Specific Fitment Context
The 1997 GMC Savana 1500 Cargo is in year 2 of 19 using the 6x139.7 pattern (1996–2014). Wheels from any 1996–2014 GMC Savana 1500 Cargo are cross-compatible with the 1997 model.
GMC Savana 1500 Cargo Bolt Pattern by Year
The table below shows how the Savana 1500 Cargo's wheel specifications have changed over the years. The 1997 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1996 | 6x139.7 | 78.1 | 20-30 |
| ▸ 1997 | 6x139.7 | 78.1 | 20-30 |
| 1998 | 6x139.7 | 78.1 | 20-30 |
| 1999 | 6x139.7 | 78.1 | 20-30 |
| 2000 | 6x139.7 | 78.1 | 20-30 |
| 2001 | 6x139.7 | 78.1 | 20-30 |
| 2002 | 6x139.7 | 78.1 | 20-30 |
| 2003 | 6x139.7 | 78.1 | 20-30 |
| 2004 | 6x139.7 | 78.1 | 20-30 |
| 2005 | 6x139.7 | 78.1 | 20-30 |
| 2006 | 6x139.7 | 78.1 | 20-30 |
| 2007 | 6x139.7 | 78.1 | 20-30 |
| 2008 | 6x139.7 | 78.1 | 20-30 |
| 2009 | 6x139.7 | 78.1 | 20-30 |
| 2010 | 6x139.7 | 78.1 | 20-30 |
| 2011 | 6x139.7 | 78.1 | 20-30 |
| 2012 | 6x139.7 | 78.1 | 20-30 |
| 2013 | 6x139.7 | 78.1 | 20-30 |
| 2014 | 6x139.7 | 78.1 | 20-30 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 1997 GMC Savana 1500 Cargo
For your 1997 GMC Savana 1500 Cargo, the 6x139.7 bolt pattern is shared across 1996–2014 models, but critical dimensions vary. The center bore is 78.1mm; aftermarket wheels with larger bores require hub-centric rings to prevent vibration and ensure load is on the hub, not the lug nuts. Offset must stay within 20-30mm; deviations risk rubbing or bearing stress. Always use 14x1.5 lug nuts with the correct seat (cone or ball) matching the wheel. Improper seating can cause loosening. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, GMC Savana 1500 Cargo appears from 1996 to 2014 (19 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 50.0 mm
Quick Tips & Safety Warnings
- ✅ Use hub-centric rings if aftermarket wheels have a bore >78.1mm to avoid vibration.
- ✅ Stick to 20-30mm offset; lower offsets may rub suspension, higher may look sunk.
- ✅ Re-torque lug nuts to spec (140 ft-lbs) after 50-100 miles; check seat type (cone/ball).
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1997 GMC Savana 1500 Cargo — Frequently Asked Questions
What is the bolt pattern for a 1997 GMC Savana 1500 Cargo?
The 1997 GMC Savana 1500 Cargo uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 78.1mm and the offset is 20-30mm.
What other years of GMC Savana 1500 Cargo have the same bolt pattern as the 1997?
The GMC Savana 1500 Cargo uses the 6x139.7 pattern from 1996 through 2014. Wheels from any of these model years are dimensionally compatible with the 1997, provided the offset and center bore also match.
Can I put aftermarket wheels on my 1997 GMC Savana 1500 Cargo?
Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 20-30mm, and a center bore of at least 78.1mm (using hub rings if larger).
How do I measure the bolt pattern on my 1997 GMC?
The 1997 Savana 1500 Cargo uses a 6x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the factory wheel offset for a 1997 GMC Savana 1500 Cargo?
The OEM offset for the 1997 Savana 1500 Cargo is typically around 20-30mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What does 20-30mm offset mean for the 1997 Savana 1500 Cargo?
An offset of 20-30mm means the wheel's mounting surface is 20-30mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your GMC.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset