2000 GMC Savana 2500 Passenger Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 GMC Savana 2500 Passenger, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 116.7 mm |
| Offset (ET) | 28 |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 8x165.1 is commonly referred to as 8x6.5" in US Standard.
2000 Savana 2500 Passenger — Year-Specific Fitment Context
The 2000 GMC Savana 2500 Passenger is in year 5 of 15 using the 8x165.1 pattern (1996–2010). Wheels from any 1996–2010 GMC Savana 2500 Passenger are cross-compatible with the 2000 model. Across its full production run (1996–2024), the Savana 2500 Passenger has also used: 8x180.
GMC Savana 2500 Passenger Bolt Pattern by Year
The table below shows how the Savana 2500 Passenger's wheel specifications have changed over the years. The 2000 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1996 | 8x165.1 | 116.7 | 28 |
| 1997 | 8x165.1 | 116.7 | 28 |
| 1998 | 8x165.1 | 116.7 | 28 |
| 1999 | 8x165.1 | 116.7 | 28 |
| ▸ 2000 | 8x165.1 | 116.7 | 28 |
| 2001 | 8x165.1 | 116.7 | 28 |
| 2002 | 8x165.1 | 116.7 | 28 |
| 2003 | 8x165.1 | 116.7 | 28 |
| 2004 | 8x165.1 | 116.7 | 28 |
| 2005 | 8x165.1 | 116.7 | 28 |
| 2006 | 8x165.1 | 116.7 | 28 |
| 2007 | 8x165.1 | 116.7 | 28 |
| 2008 | 8x165.1 | 116.7 | 28 |
| 2009 | 8x165.1 | 116.7 | 28 |
| 2010 | 8x165.1 | 116.7 | 28 |
| 2011 | 8x180 | 124.9 | 44 |
| 2012 | 8x180 | 124.9 | 44 |
| 2013 | 8x180 | 124.9 | 44 |
| 2014 | 8x180 | 124.9 | 44 |
| 2015 | 8x180 | 124.9 | 44 |
| 2016 | 8x180 | 124.9 | 44 |
| 2017 | 8x180 | 124.9 | 44 |
| 2018 | 8x180 | 124.9 | 44 |
| 2019 | 8x180 | 124.9 | 44 |
| 2021 | 8x180 | 124.9 | 44 |
| 2022 | 8x180 | 124.9 | 44 |
| 2023 | 8x180 | 124.9 | 44 |
| 2024 | 8x180 | 124.9 | 44 |
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
Expert Buying Guide for 2000 GMC Savana 2500 Passenger
For your 2000 GMC Savana 2500 Passenger, the 8x165.1 bolt pattern is shared with 1996–2010 models. The center bore is 116.7mm; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. Offset is critical: the factory spec is 28mm. Deviating more than ±10mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (14x1.5) and seat type (cone seat). Never use ball-seat lug nuts on cone-seat wheels, as this can lead to wheel loosening. Safety first: verify all specs before installation.
Historical Fitment Data Reference
In our dataset, GMC Savana 2500 Passenger appears from 1996 to 2024 (28 model years). Across model years, this model appears with 2 bolt patterns (8x165.1, 8x180).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 16.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lb after 50 miles of driving.
- ✅ Check for clearance between the wheel spokes and brake calipers, especially with aftermarket wheels.
- ✅ If using wheels from a 1996–2010 Savana 2500 Passenger, confirm the offset is within 28mm ±10mm to avoid suspension or fender contact.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2000 GMC Savana 2500 Passenger — Frequently Asked Questions
What is the bolt pattern for a 2000 GMC Savana 2500 Passenger?
The 2000 GMC Savana 2500 Passenger uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 116.7mm and the offset is 28mm.
What other years of GMC Savana 2500 Passenger have the same bolt pattern as the 2000?
The GMC Savana 2500 Passenger uses the 8x165.1 pattern from 1996 through 2010. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
What is the PCD for a 2000 GMC Savana 2500 Passenger?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2000 Savana 2500 Passenger, the PCD is 8x165.1.
What is the center bore of a 2000 GMC Savana 2500 Passenger?
The factory center bore (hub bore) for the 2000 GMC Savana 2500 Passenger is 116.7mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Why is matching the 116.7mm center bore important for the 2000 Savana 2500 Passenger?
The 116.7mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Do 2000 GMC Savana 2500 Passengers use lug bolts or lug nuts?
The 2000 Savana 2500 Passenger requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset