2000 GMC Sierra (Classic) 3500 Extended Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 GMC Sierra (Classic) 3500 Extended Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 116.7 mm |
| Offset (ET) | 20-40 |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 8x165.1 is commonly referred to as 8x6.5" in US Standard.
2000 Sierra (Classic) 3500 Extended Cab — Year-Specific Fitment Context
The 2000 model year marks the beginning of the GMC Sierra (Classic) 3500 Extended Cab's 8x165.1 bolt pattern era, which continued through 2007 (8 consecutive years). Wheels from any 2000–2007 GMC Sierra (Classic) 3500 Extended Cab are cross-compatible with the 2000 model.
GMC Sierra (Classic) 3500 Extended Cab Bolt Pattern by Year
The table below shows how the Sierra (Classic) 3500 Extended Cab's wheel specifications have changed over the years. The 2000 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 2000 | 8x165.1 | 116.7 | 20-40 |
| 2007 | 8x165.1 | 116.7 | 20-40 |
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
Expert Buying Guide for 2000 GMC Sierra (Classic) 3500 Extended Cab
The 2000 GMC Sierra (Classic) 3500 Extended Cab uses an 8x165.1 bolt pattern with a critical center bore of 116.7mm. Aftermarket wheels must have a bore ≥116.7mm; use hub-centric rings to avoid vibration and ensure load is on the hub, not the lug nuts. Offset range is 20-40mm; staying within this prevents rubbing on suspension or fenders. Always match the factory 14x1.5 lug nut thread pitch and use conical (60-degree) or ball seat nuts as specified. Improper seat type can cause wheel loosening. Verify wheel load rating exceeds the vehicle's GVWR for safety.
Historical Fitment Data Reference
In our dataset, GMC Sierra (Classic) 3500 Extended Cab appears from 2000 to 2007 (2 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 60.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lbs after 50 miles of driving to account for settling.
- ✅ Avoid using wheels from 2008+ models as the bolt pattern changed to 8x180.
- ✅ Check for clearance with dual rear wheels if equipped; aftermarket wheels may require different offset or spacers.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2000 GMC Sierra (Classic) 3500 Extended Cab — Frequently Asked Questions
What is the bolt pattern for a 2000 GMC Sierra (Classic) 3500 Extended Cab?
The 2000 GMC Sierra (Classic) 3500 Extended Cab uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 116.7mm and the offset is 20-40mm.
What other years of GMC Sierra (Classic) 3500 Extended Cab have the same bolt pattern as the 2000?
The GMC Sierra (Classic) 3500 Extended Cab uses the 8x165.1 pattern from 2000 through 2007. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
Why is matching the 116.7mm center bore important for the 2000 Sierra (Classic) 3500 Extended Cab?
The 116.7mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Do 2000 GMC Sierra (Classic) 3500 Extended Cabs use lug bolts or lug nuts?
The 2000 Sierra (Classic) 3500 Extended Cab requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the center bore of a 2000 GMC Sierra (Classic) 3500 Extended Cab?
The factory center bore (hub bore) for the 2000 GMC Sierra (Classic) 3500 Extended Cab is 116.7mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the factory wheel offset for a 2000 GMC Sierra (Classic) 3500 Extended Cab?
The OEM offset for the 2000 Sierra (Classic) 3500 Extended Cab is typically around 20-40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset