2019 GMC Sierra 2500 HD Crew Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 GMC Sierra 2500 HD Crew Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x180 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 124.9 mm |
| Offset (ET) | 44 |
| Torque Specs | 140 ft-lbs (190 Nm) |
2019 Sierra 2500 HD Crew Cab — Year-Specific Fitment Context
The 2019 GMC Sierra 2500 HD Crew Cab is in year 9 of 14 using the 8x180 pattern (2011–2024). Wheels from any 2011–2024 GMC Sierra 2500 HD Crew Cab are cross-compatible with the 2019 model. Across its full production run (2001–2024), the Sierra 2500 HD Crew Cab has also used: 8x165.1.
GMC Sierra 2500 HD Crew Cab Bolt Pattern by Year
The table below shows how the Sierra 2500 HD Crew Cab's wheel specifications have changed over the years. The 2019 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2001 | 8x165.1 | 116.7 | 20-40 |
| 2002 | 8x165.1 | 116.7 | 20-40 |
| 2003 | 8x165.1 | 116.7 | 20-40 |
| 2004 | 8x165.1 | 116.7 | 20-40 |
| 2005 | 8x165.1 | 116.7 | 20-40 |
| 2006 | 8x165.1 | 116.7 | 20-40 |
| 2007 | 8x165.1 | 116.7 | 20-40 |
| 2008 | 8x165.1 | 116.7 | 20-40 |
| 2009 | 8x165.1 | 116.7 | 20-40 |
| 2010 | 8x165.1 | 116.7 | 20-40 |
| 2011 | 8x180 | 124.9 | 44 |
| 2012 | 8x180 | 124.9 | 44 |
| 2013 | 8x180 | 124.9 | 44 |
| 2014 | 8x180 | 124.9 | 44 |
| 2015 | 8x180 | 124.9 | 44 |
| 2016 | 8x180 | 124.9 | 44 |
| 2017 | 8x180 | 124.9 | 44 |
| 2018 | 8x180 | 124.9 | 44 |
| ▸ 2019 | 8x180 | 124.9 | 44 |
| 2020 | 8x180 | 124.9 | 44 |
| 2021 | 8x180 | 124.9 | 44 |
| 2022 | 8x180 | 124.9 | 44 |
| 2024 | 8x180 | 124.9 | 44 |
8x180 Pattern Context
This bolt pattern appears on 247 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 8x180:
Expert Buying Guide for 2019 GMC Sierra 2500 HD Crew Cab
For the 2019 GMC Sierra 2500 HD Crew Cab, the 8x180 bolt pattern and 124.9mm center bore are critical. Aftermarket wheels must match the bore exactly or use hub-centric rings to prevent vibration and ensure load is on the hub, not the lug nuts. The factory offset is 44mm; deviations affect scrub radius and clearance. Always verify lug nut seat type: factory uses 14x1.5 thread with a cone seat. Using incorrect seat type (e.g., ball seat) can cause wheel loosening. Re-torque after 50-100 miles. Avoid wheels from 2001-2010 models (8x165.1 pattern) as they are incompatible.
Historical Fitment Data Reference
In our dataset, GMC Sierra 2500 HD Crew Cab appears from 2001 to 2024 (23 model years). Across model years, this model appears with 2 bolt patterns (8x165.1, 8x180).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 84.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings if aftermarket wheel center bore is larger than 124.9mm to prevent vibration and hub damage.
- ✅ Re-torque lug nuts to 140 ft-lbs after 50-100 miles of driving to ensure proper seating.
- ✅ Verify wheel offset stays within ±5mm of factory 44mm to avoid rubbing on suspension or brake components.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 GMC Sierra 2500 HD Crew Cab — Frequently Asked Questions
What is the bolt pattern for a 2019 GMC Sierra 2500 HD Crew Cab?
The 2019 GMC Sierra 2500 HD Crew Cab uses a 8x180 bolt pattern (also called lug pattern or PCD). The center bore is 124.9mm and the offset is 44mm.
What other years of GMC Sierra 2500 HD Crew Cab have the same bolt pattern as the 2019?
The GMC Sierra 2500 HD Crew Cab uses the 8x180 pattern from 2011 through 2024. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
What is the PCD for a 2019 GMC Sierra 2500 HD Crew Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2019 Sierra 2500 HD Crew Cab, the PCD is 8x180.
What is the center bore of a 2019 GMC Sierra 2500 HD Crew Cab?
The factory center bore (hub bore) for the 2019 GMC Sierra 2500 HD Crew Cab is 124.9mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I put aftermarket wheels on my 2019 GMC Sierra 2500 HD Crew Cab?
Absolutely. Just ensure the aftermarket wheels have a 8x180 bolt pattern, an offset near 44mm, and a center bore of at least 124.9mm (using hub rings if larger).
Do 2019 GMC Sierra 2500 HD Crew Cabs use lug bolts or lug nuts?
The 2019 Sierra 2500 HD Crew Cab requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset