2007 GMC Sierra 2500 HD Crew Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 GMC Sierra 2500 HD Crew Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 116.7 mm |
| Offset (ET) | 20-40 |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 8x165.1 is commonly referred to as 8x6.5" in US Standard.
2007 Sierra 2500 HD Crew Cab — Year-Specific Fitment Context
The 2007 GMC Sierra 2500 HD Crew Cab is in year 7 of 10 using the 8x165.1 pattern (2001–2010). Wheels from any 2001–2010 GMC Sierra 2500 HD Crew Cab are cross-compatible with the 2007 model. Across its full production run (2001–2024), the Sierra 2500 HD Crew Cab has also used: 8x180.
GMC Sierra 2500 HD Crew Cab Bolt Pattern by Year
The table below shows how the Sierra 2500 HD Crew Cab's wheel specifications have changed over the years. The 2007 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2001 | 8x165.1 | 116.7 | 20-40 |
| 2002 | 8x165.1 | 116.7 | 20-40 |
| 2003 | 8x165.1 | 116.7 | 20-40 |
| 2004 | 8x165.1 | 116.7 | 20-40 |
| 2005 | 8x165.1 | 116.7 | 20-40 |
| 2006 | 8x165.1 | 116.7 | 20-40 |
| ▸ 2007 | 8x165.1 | 116.7 | 20-40 |
| 2008 | 8x165.1 | 116.7 | 20-40 |
| 2009 | 8x165.1 | 116.7 | 20-40 |
| 2010 | 8x165.1 | 116.7 | 20-40 |
| 2011 | 8x180 | 124.9 | 44 |
| 2012 | 8x180 | 124.9 | 44 |
| 2013 | 8x180 | 124.9 | 44 |
| 2014 | 8x180 | 124.9 | 44 |
| 2015 | 8x180 | 124.9 | 44 |
| 2016 | 8x180 | 124.9 | 44 |
| 2017 | 8x180 | 124.9 | 44 |
| 2018 | 8x180 | 124.9 | 44 |
| 2019 | 8x180 | 124.9 | 44 |
| 2020 | 8x180 | 124.9 | 44 |
| 2021 | 8x180 | 124.9 | 44 |
| 2022 | 8x180 | 124.9 | 44 |
| 2024 | 8x180 | 124.9 | 44 |
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
Expert Buying Guide for 2007 GMC Sierra 2500 HD Crew Cab
For your 2007 GMC Sierra 2500 HD Crew Cab, the 8x165.1 bolt pattern and 116.7mm center bore are critical. Aftermarket wheels often have a larger center bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. Offset must stay within 20-40mm; deviations can cause rubbing or suspension interference. Always use 14x1.5 lug nuts with the correct seat type—factory wheels use a cone seat, while aftermarket may require ball or flat seats. Mismatched lug nuts risk loosening and wheel detachment. Verify compatibility with 2001–2010 models; avoid 8x180 pattern wheels from later years.
Historical Fitment Data Reference
In our dataset, GMC Sierra 2500 HD Crew Cab appears from 2001 to 2024 (23 model years). Across model years, this model appears with 2 bolt patterns (8x165.1, 8x180).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 84.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lbs after 50-100 miles of driving to ensure proper seating.
- ✅ When using aftermarket wheels, always install hub-centric rings to match the 116.7mm bore; plastic rings are acceptable for street use.
- ✅ Check for caliper clearance with aftermarket wheels, especially if offset is near the 20mm minimum; some designs may require spacers.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 GMC Sierra 2500 HD Crew Cab — Frequently Asked Questions
What is the bolt pattern for a 2007 GMC Sierra 2500 HD Crew Cab?
The 2007 GMC Sierra 2500 HD Crew Cab uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 116.7mm and the offset is 20-40mm.
What other years of GMC Sierra 2500 HD Crew Cab have the same bolt pattern as the 2007?
The GMC Sierra 2500 HD Crew Cab uses the 8x165.1 pattern from 2001 through 2010. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
Do 2007 GMC Sierra 2500 HD Crew Cabs use lug bolts or lug nuts?
The 2007 Sierra 2500 HD Crew Cab requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How do I measure the bolt pattern on my 2007 GMC?
The 2007 Sierra 2500 HD Crew Cab uses a 8x165.1 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I use spacers on my 2007 GMC Sierra 2500 HD Crew Cab?
Yes, but ensure the wheel spacers match the 8x165.1 bolt pattern and 116.7mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
What is the PCD for a 2007 GMC Sierra 2500 HD Crew Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2007 Sierra 2500 HD Crew Cab, the PCD is 8x165.1.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset