2004 GMC Sierra 2500 HD Crew Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2004 GMC Sierra 2500 HD Crew Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 116.7 mm |
| Offset (ET) | 20-40 |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 8x165.1 is commonly referred to as 8x6.5" in US Standard.
2004 Sierra 2500 HD Crew Cab — Year-Specific Fitment Context
The 2004 GMC Sierra 2500 HD Crew Cab is in year 4 of 10 using the 8x165.1 pattern (2001–2010). Wheels from any 2001–2010 GMC Sierra 2500 HD Crew Cab are cross-compatible with the 2004 model. Across its full production run (2001–2024), the Sierra 2500 HD Crew Cab has also used: 8x180.
GMC Sierra 2500 HD Crew Cab Bolt Pattern by Year
The table below shows how the Sierra 2500 HD Crew Cab's wheel specifications have changed over the years. The 2004 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2001 | 8x165.1 | 116.7 | 20-40 |
| 2002 | 8x165.1 | 116.7 | 20-40 |
| 2003 | 8x165.1 | 116.7 | 20-40 |
| ▸ 2004 | 8x165.1 | 116.7 | 20-40 |
| 2005 | 8x165.1 | 116.7 | 20-40 |
| 2006 | 8x165.1 | 116.7 | 20-40 |
| 2007 | 8x165.1 | 116.7 | 20-40 |
| 2008 | 8x165.1 | 116.7 | 20-40 |
| 2009 | 8x165.1 | 116.7 | 20-40 |
| 2010 | 8x165.1 | 116.7 | 20-40 |
| 2011 | 8x180 | 124.9 | 44 |
| 2012 | 8x180 | 124.9 | 44 |
| 2013 | 8x180 | 124.9 | 44 |
| 2014 | 8x180 | 124.9 | 44 |
| 2015 | 8x180 | 124.9 | 44 |
| 2016 | 8x180 | 124.9 | 44 |
| 2017 | 8x180 | 124.9 | 44 |
| 2018 | 8x180 | 124.9 | 44 |
| 2019 | 8x180 | 124.9 | 44 |
| 2020 | 8x180 | 124.9 | 44 |
| 2021 | 8x180 | 124.9 | 44 |
| 2022 | 8x180 | 124.9 | 44 |
| 2024 | 8x180 | 124.9 | 44 |
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
Expert Buying Guide for 2004 GMC Sierra 2500 HD Crew Cab
For your 2004 GMC Sierra 2500 HD Crew Cab, the 8x165.1 bolt pattern is shared with 2001–2010 models. The 116.7mm center bore is critical; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. Offset must stay within 20-40mm; deviations risk rubbing or bearing stress. Always use 14x1.5 lug nuts with the correct seat type (cone or ball) matching the wheel. Mismatched seats can cause loosening. Re-torque after 50-100 miles. Avoid wheels from 8x180 pattern models (2011+).
Historical Fitment Data Reference
In our dataset, GMC Sierra 2500 HD Crew Cab appears from 2001 to 2024 (23 model years). Across model years, this model appears with 2 bolt patterns (8x165.1, 8x180).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 84.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lbs after 50-100 miles of driving.
- ✅ Verify aftermarket wheels include hub-centric rings for 116.7mm bore; otherwise, vibrations may occur.
- ✅ Check offset carefully: too low (<20mm) causes tire rub on fenders; too high (>40mm) may contact suspension components.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2004 GMC Sierra 2500 HD Crew Cab — Frequently Asked Questions
What is the bolt pattern for a 2004 GMC Sierra 2500 HD Crew Cab?
The 2004 GMC Sierra 2500 HD Crew Cab uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 116.7mm and the offset is 20-40mm.
What other years of GMC Sierra 2500 HD Crew Cab have the same bolt pattern as the 2004?
The GMC Sierra 2500 HD Crew Cab uses the 8x165.1 pattern from 2001 through 2010. Wheels from any of these model years are dimensionally compatible with the 2004, provided the offset and center bore also match.
What does 20-40mm offset mean for the 2004 Sierra 2500 HD Crew Cab?
An offset of 20-40mm means the wheel's mounting surface is 20-40mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your GMC.
How tight should I torque the lug nuts on a 2004 GMC Sierra 2500 HD Crew Cab?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
How do I measure the bolt pattern on my 2004 GMC?
The 2004 Sierra 2500 HD Crew Cab uses a 8x165.1 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the PCD for a 2004 GMC Sierra 2500 HD Crew Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2004 Sierra 2500 HD Crew Cab, the PCD is 8x165.1.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset