1993 GMC Vandura 2500 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1993 GMC Vandura 2500, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 116.7 mm |
| Offset (ET) | 20 |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 8x165.1 is commonly referred to as 8x6.5" in US Standard.
1993 Vandura 2500 — Year-Specific Fitment Context
The 1993 GMC Vandura 2500 is in year 2 of 3 using the 8x165.1 pattern (1992–1994). Wheels from any 1992–1994 GMC Vandura 2500 are cross-compatible with the 1993 model.
GMC Vandura 2500 Bolt Pattern by Year
The table below shows how the Vandura 2500's wheel specifications have changed over the years. The 1993 model year is highlighted.
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
Expert Buying Guide for 1993 GMC Vandura 2500
When selecting wheels for your 1993 GMC Vandura 2500, the 8x165.1 bolt pattern is shared with 1992–1994 models. The center bore is 116.7mm—critical for hub-centric fitment. Aftermarket wheels often have larger bores, requiring hub-centric rings to prevent vibration and ensure load is on the hub, not the lug nuts. Offset is sensitive; the factory spec is 20mm. Sticking close to this range maintains proper scrub radius and prevents tire rubbing on suspension or bodywork. Always verify lug nut thread pitch (14x1.5) and seat type: use conical (60-degree) or ball seat nuts as specified. Never mix seat types, as improper seating can cause wheel loosening. Safety first: incorrect fitment compromises handling and braking.
Historical Fitment Data Reference
In our dataset, GMC Vandura 2500 appears from 1992 to 1994 (3 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50–100 miles of driving to account for settling.
- ✅ Avoid wheels with offset beyond ±10mm from factory (20mm) to prevent bearing wear or rubbing.
- ✅ Use hub-centric rings if aftermarket wheel bore exceeds 116.7mm; plastic rings are acceptable for street use.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1993 GMC Vandura 2500 — Frequently Asked Questions
What is the bolt pattern for a 1993 GMC Vandura 2500?
The 1993 GMC Vandura 2500 uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 116.7mm and the offset is 20mm.
What other years of GMC Vandura 2500 have the same bolt pattern as the 1993?
The GMC Vandura 2500 uses the 8x165.1 pattern from 1992 through 1994. Wheels from any of these model years are dimensionally compatible with the 1993, provided the offset and center bore also match.
How do I measure the bolt pattern on my 1993 GMC?
The 1993 Vandura 2500 uses a 8x165.1 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 1993 GMC Vandura 2500?
The factory center bore (hub bore) for the 1993 GMC Vandura 2500 is 116.7mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I put aftermarket wheels on my 1993 GMC Vandura 2500?
Absolutely. Just ensure the aftermarket wheels have a 8x165.1 bolt pattern, an offset near 20mm, and a center bore of at least 116.7mm (using hub rings if larger).
What is the PCD for a 1993 GMC Vandura 2500?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1993 Vandura 2500, the PCD is 8x165.1.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset