2019 GMC Yukon XL Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 GMC Yukon XL, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 78.1 mm |
| Offset (ET) | 20-30 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2019 Yukon XL — Year-Specific Fitment Context
The 2019 GMC Yukon XL is in year 5 of 10 using the 6x139.7 pattern (2015–2024). Wheels from any 2015–2024 GMC Yukon XL are cross-compatible with the 2019 model.
GMC Yukon XL Bolt Pattern by Year
The table below shows how the Yukon XL's wheel specifications have changed over the years. The 2019 model year is highlighted.
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2019 GMC Yukon XL
For your 2019 GMC Yukon XL, the 6x139.7 bolt pattern and 78.1mm center bore are critical. Aftermarket wheels often have a larger center bore; use hub-centric rings to prevent vibration and ensure proper load transfer. Offset must stay within 20-30mm to avoid rubbing or suspension interference. Always verify lug nut thread pitch (14x1.5) and seat type—factory uses cone seat; mismatched seats can cause wheel loss. Re-torque after 50-100 miles. Wheels from 2015-2024 Yukon XL models are direct fit.
Historical Fitment Data Reference
In our dataset, GMC Yukon XL appears from 2015 to 2024 (10 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 50.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lbs after 50-100 miles of driving.
- ✅ Avoid wheels with offset below 20mm; they may rub on brake calipers or fenders.
- ✅ Check that aftermarket wheels include hub-centric rings for 78.1mm bore; otherwise, order separately.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 GMC Yukon XL — Frequently Asked Questions
What is the bolt pattern for a 2019 GMC Yukon XL?
The 2019 GMC Yukon XL uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 78.1mm and the offset is 20-30mm.
What other years of GMC Yukon XL have the same bolt pattern as the 2019?
The GMC Yukon XL uses the 6x139.7 pattern from 2015 through 2024. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
What is the factory wheel offset for a 2019 GMC Yukon XL?
The OEM offset for the 2019 Yukon XL is typically around 20-30mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What does 20-30mm offset mean for the 2019 Yukon XL?
An offset of 20-30mm means the wheel's mounting surface is 20-30mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your GMC.
What is the PCD for a 2019 GMC Yukon XL?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2019 Yukon XL, the PCD is 6x139.7.
Can I put aftermarket wheels on my 2019 GMC Yukon XL?
Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 20-30mm, and a center bore of at least 78.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset