2024 GMC Yukon XL Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 GMC Yukon XL, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 78.1 mm |
| Offset (ET) | 20-30 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2024 Yukon XL — Year-Specific Fitment Context
The 2024 model year is the final year of the GMC Yukon XL's 6x139.7 bolt pattern run (since 2015). Wheels from any 2015–2024 GMC Yukon XL are cross-compatible with the 2024 model.
GMC Yukon XL Bolt Pattern by Year
The table below shows how the Yukon XL's wheel specifications have changed over the years. The 2024 model year is highlighted.
Fitment Notes
The 2024 GMC Yukon XL has a bolt pattern of 6x139.7.
Imperial Conversion: This bolt pattern is commonly referred to as 6x5.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 6x5.5".
This means it is a 6 lug pattern with a circle diameter of 139.7mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, GMC Yukon XL appears from 2015 to 2024 (10 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 50.0 mm
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
2024 GMC Yukon XL — Frequently Asked Questions
What is the bolt pattern for a 2024 GMC Yukon XL?
The 2024 GMC Yukon XL uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 78.1mm and the offset is 20-30mm.
What other years of GMC Yukon XL have the same bolt pattern as the 2024?
The GMC Yukon XL uses the 6x139.7 pattern from 2015 through 2024. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2024 GMC Yukon XL?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the center bore of a 2024 GMC Yukon XL?
The factory center bore (hub bore) for the 2024 GMC Yukon XL is 78.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Do 2024 GMC Yukon XLs use lug bolts or lug nuts?
The 2024 Yukon XL requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I use spacers on my 2024 GMC Yukon XL?
Yes, but ensure the wheel spacers match the 6x139.7 bolt pattern and 78.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
Fitment Checklist Before You Buy Wheels
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
GMC Yukon XL is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2015-2024 (10 model years).
- Observed bolt-pattern variants: 1 (6x139.7).
- Observed total offset span across years: 50.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2024 GMC Yukon XL, please report it via our About page contact so we can verify and update this record.