2018 Honda Clarity Plug-in Hybrid Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2018 Honda Clarity Plug-in Hybrid, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | M12x1.5 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 35-45mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2018 Clarity Plug-in Hybrid — Year-Specific Fitment Context
The 2018 model year marks the beginning of the Honda Clarity Plug-in Hybrid's 5x114.3 bolt pattern era, which continued through 2021 (4 consecutive years). Wheels from any 2018–2021 Honda Clarity Plug-in Hybrid are cross-compatible with the 2018 model.
Honda Clarity Plug-in Hybrid Bolt Pattern by Year
The table below shows how the Clarity Plug-in Hybrid's wheel specifications have changed over the years. The 2018 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2018 Honda Clarity Plug-in Hybrid
For your 2018 Honda Clarity Plug-in Hybrid, the 5x114.3 bolt pattern and 64.1mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The offset range is 35-45mm; deviating can cause rubbing or poor handling. Always use M12x1.5 lug nuts with the correct seat type—factory wheels use a ball seat, while aftermarket may require conical (60-degree) or ball seat. Verify thread engagement (at least 7 turns) and torque to 80 ft-lbs. Re-torque after 50 miles.
Historical Fitment Data Reference
In our dataset, Honda Clarity Plug-in Hybrid appears from 2018 to 2021 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50 miles of driving to ensure proper seating.
- ✅ Avoid using wheels with a center bore larger than 64.1mm without hub-centric rings.
- ✅ Check offset carefully: offsets below 35mm may cause inner tire rubbing on suspension components.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2018 Honda Clarity Plug-in Hybrid — Frequently Asked Questions
What is the bolt pattern for a 2018 Honda Clarity Plug-in Hybrid?
The 2018 Honda Clarity Plug-in Hybrid uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 35-45mmmm.
What other years of Honda Clarity Plug-in Hybrid have the same bolt pattern as the 2018?
The Honda Clarity Plug-in Hybrid uses the 5x114.3 pattern from 2018 through 2021. Wheels from any of these model years are dimensionally compatible with the 2018, provided the offset and center bore also match.
What does 35-45mmmm offset mean for the 2018 Clarity Plug-in Hybrid?
An offset of 35-45mmmm means the wheel's mounting surface is 35-45mmmm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Honda.
Will wheels from another Honda fit my 2018 Clarity Plug-in Hybrid?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 64.1mm.
What is the PCD for a 2018 Honda Clarity Plug-in Hybrid?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2018 Clarity Plug-in Hybrid, the PCD is 5x114.3.
Can I use spacers on my 2018 Honda Clarity Plug-in Hybrid?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 64.1mm center bore. Also verify that you have enough thread engagement for your M12x1.5 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset