2020 Honda Clarity Plug-in Hybrid Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 Honda Clarity Plug-in Hybrid, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | M12x1.5 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 35-45mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2020 Clarity Plug-in Hybrid — Year-Specific Fitment Context
The 2020 Honda Clarity Plug-in Hybrid is in year 3 of 4 using the 5x114.3 pattern (2018–2021). Wheels from any 2018–2021 Honda Clarity Plug-in Hybrid are cross-compatible with the 2020 model.
Honda Clarity Plug-in Hybrid Bolt Pattern by Year
The table below shows how the Clarity Plug-in Hybrid's wheel specifications have changed over the years. The 2020 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2020 Honda Clarity Plug-in Hybrid
For your 2020 Honda Clarity Plug-in Hybrid, the 5x114.3 bolt pattern and 64.1mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibrations and ensure proper load transfer. The offset range is 35-45mm; deviating can cause rubbing or clearance issues with suspension and brakes. Always use M12x1.5 lug nuts with the correct seat type—factory wheels use a conical (60-degree) seat; aftermarket wheels may require ball or conical seats. Never mix seat types. Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
Historical Fitment Data Reference
In our dataset, Honda Clarity Plug-in Hybrid appears from 2018 to 2021 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80 ft-lb after 50-100 miles of driving.
- ✅ Verify wheel bore diameter; use hub-centric rings if aftermarket bore exceeds 64.1mm.
- ✅ Check offset carefully: 35-45mm is safe; lower offsets may rub fenders, higher offsets may contact brake calipers.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2020 Honda Clarity Plug-in Hybrid — Frequently Asked Questions
What is the bolt pattern for a 2020 Honda Clarity Plug-in Hybrid?
The 2020 Honda Clarity Plug-in Hybrid uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 35-45mmmm.
What other years of Honda Clarity Plug-in Hybrid have the same bolt pattern as the 2020?
The Honda Clarity Plug-in Hybrid uses the 5x114.3 pattern from 2018 through 2021. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
Do 2020 Honda Clarity Plug-in Hybrids use lug bolts or lug nuts?
The 2020 Clarity Plug-in Hybrid requires M12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I put aftermarket wheels on my 2020 Honda Clarity Plug-in Hybrid?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-45mmmm, and a center bore of at least 64.1mm (using hub rings if larger).
How do I measure the bolt pattern on my 2020 Honda?
The 2020 Clarity Plug-in Hybrid uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Why is matching the 64.1mm center bore important for the 2020 Clarity Plug-in Hybrid?
The 64.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset