2024 Honda CR-V Hybrid Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Honda CR-V Hybrid, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2024 CR-V Hybrid — Year-Specific Fitment Context
The 2024 model year is the final year of the Honda CR-V Hybrid's 5x114.3 bolt pattern run (since 2020). Wheels from any 2020–2024 Honda CR-V Hybrid are cross-compatible with the 2024 model.
Honda CR-V Hybrid Bolt Pattern by Year
The table below shows how the CR-V Hybrid's wheel specifications have changed over the years. The 2024 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2024 Honda CR-V Hybrid
For your 2024 Honda CR-V Hybrid, the 5x114.3 bolt pattern and 64.1mm center bore are critical. Aftermarket wheels with a larger bore require hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 45mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use 12x1.5 lug nuts with the correct seat type—factory wheels use a ball seat, while many aftermarket wheels require a conical (60-degree) seat. Mixing seat types can lead to loose wheels and catastrophic failure. Verify lug nut compatibility before installation.
Historical Fitment Data Reference
In our dataset, Honda CR-V Hybrid appears from 2020 to 2024 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ If using aftermarket wheels, ensure hub-centric rings are installed to match the 64.1mm center bore.
- ✅ Check that aftermarket wheels have sufficient clearance for the brake calipers and suspension components, especially with offset changes.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Honda CR-V Hybrid — Frequently Asked Questions
What is the bolt pattern for a 2024 Honda CR-V Hybrid?
The 2024 Honda CR-V Hybrid uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 45mm.
What other years of Honda CR-V Hybrid have the same bolt pattern as the 2024?
The Honda CR-V Hybrid uses the 5x114.3 pattern from 2020 through 2024. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
Can I use spacers on my 2024 Honda CR-V Hybrid?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 64.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
Why is matching the 64.1mm center bore important for the 2024 CR-V Hybrid?
The 64.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the factory wheel offset for a 2024 Honda CR-V Hybrid?
The OEM offset for the 2024 CR-V Hybrid is typically around 45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the center bore of a 2024 Honda CR-V Hybrid?
The factory center bore (hub bore) for the 2024 Honda CR-V Hybrid is 64.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset