2004 Honda Pilot Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2004 Honda Pilot, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2004 Pilot — Year-Specific Fitment Context
The 2004 Honda Pilot is in year 2 of 6 using the 5x114.3 pattern (2003–2008). Wheels from any 2003–2008 Honda Pilot are cross-compatible with the 2004 model. Across its full production run (2003–2024), the Pilot has also used: 5x120.
Honda Pilot Bolt Pattern by Year
The table below shows how the Pilot's wheel specifications have changed over the years. The 2004 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2003 | 5x114.3 | 64.1 | 45 |
| ▸ 2004 | 5x114.3 | 64.1 | 45 |
| 2005 | 5x114.3 | 64.1 | 45 |
| 2006 | 5x114.3 | 64.1 | 45 |
| 2007 | 5x114.3 | 64.1 | 45 |
| 2008 | 5x114.3 | 64.1 | 45 |
| 2009 | 5x120 | 64.1 | 45 |
| 2010 | 5x120 | 64.1 | 45 |
| 2011 | 5x120 | 64.1 | 45 |
| 2012 | 5x120 | 64.1 | 45 |
| 2013 | 5x120 | 64.1 | 45 |
| 2014 | 5x120 | 64.1 | 45 |
| 2015 | 5x120 | 64.1 | 45 |
| 2016 | 5x120 | 64.1 | 55 |
| 2017 | 5x120 | 64.1 | 55 |
| 2018 | 5x120 | 64.1 | 55 |
| 2019 | 5x120 | 64.1 | 55 |
| 2020 | 5x120 | 64.1 | 55 |
| 2021 | 5x120 | 64.1 | 55 |
| 2022 | 5x120 | 64.1 | 55 |
| 2023 | 5x120 | 64.1 | 55 |
| 2024 | 5x120 | 64.1 | 55 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2004 Honda Pilot
For your 2004 Honda Pilot, the 5x114.3 bolt pattern and 64.1mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 45mm; staying within ±5mm is recommended to avoid rubbing or suspension interference. Always use 12x1.5 lug nuts with the correct seat type—factory wheels use a ball seat, while many aftermarket wheels require a conical (60-degree) seat. Mismatched lug nuts can cause wheel loosening. Verify lug nut compatibility before installation.
Historical Fitment Data Reference
In our dataset, Honda Pilot appears from 2003 to 2024 (22 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 5x120).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 10.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fitment wheels without hub-centric rings; they can cause vibration and stress on wheel studs.
- ✅ When upgrading to larger wheels, check brake caliper clearance; some aftermarket designs may require spacers.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2004 Honda Pilot — Frequently Asked Questions
What is the bolt pattern for a 2004 Honda Pilot?
The 2004 Honda Pilot uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 45mm.
What other years of Honda Pilot have the same bolt pattern as the 2004?
The Honda Pilot uses the 5x114.3 pattern from 2003 through 2008. Wheels from any of these model years are dimensionally compatible with the 2004, provided the offset and center bore also match.
What is the factory wheel offset for a 2004 Honda Pilot?
The OEM offset for the 2004 Pilot is typically around 45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the PCD for a 2004 Honda Pilot?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2004 Pilot, the PCD is 5x114.3.
What is the center bore of a 2004 Honda Pilot?
The factory center bore (hub bore) for the 2004 Honda Pilot is 64.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Do 2004 Honda Pilots use lug bolts or lug nuts?
The 2004 Pilot requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset