2008 Honda Pilot Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Honda Pilot, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2008 Pilot — Year-Specific Fitment Context
The 2008 model year is the final year of the Honda Pilot's 5x114.3 bolt pattern run (since 2003). Wheels from any 2003–2008 Honda Pilot are cross-compatible with the 2008 model. Important: starting in 2009, Honda switched to 5x120 — those wheels will not fit the 2008 model. Across its full production run (2003–2024), the Pilot has also used: 5x120.
Honda Pilot Bolt Pattern by Year
The table below shows how the Pilot's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2003 | 5x114.3 | 64.1 | 45 |
| 2004 | 5x114.3 | 64.1 | 45 |
| 2005 | 5x114.3 | 64.1 | 45 |
| 2006 | 5x114.3 | 64.1 | 45 |
| 2007 | 5x114.3 | 64.1 | 45 |
| ▸ 2008 | 5x114.3 | 64.1 | 45 |
| 2009 | 5x120 | 64.1 | 45 |
| 2010 | 5x120 | 64.1 | 45 |
| 2011 | 5x120 | 64.1 | 45 |
| 2012 | 5x120 | 64.1 | 45 |
| 2013 | 5x120 | 64.1 | 45 |
| 2014 | 5x120 | 64.1 | 45 |
| 2015 | 5x120 | 64.1 | 45 |
| 2016 | 5x120 | 64.1 | 55 |
| 2017 | 5x120 | 64.1 | 55 |
| 2018 | 5x120 | 64.1 | 55 |
| 2019 | 5x120 | 64.1 | 55 |
| 2020 | 5x120 | 64.1 | 55 |
| 2021 | 5x120 | 64.1 | 55 |
| 2022 | 5x120 | 64.1 | 55 |
| 2023 | 5x120 | 64.1 | 55 |
| 2024 | 5x120 | 64.1 | 55 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2008 Honda Pilot
For your 2008 Honda Pilot, the bolt pattern is 5x114.3, but the center bore is 64.1mm—a critical spec. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive: stock is 45mm, but a range of 40–50mm is acceptable; straying too far risks rubbing or bearing wear. Lug nuts must be 12x1.5 with a conical (60-degree) seat—never use ball-seat or shank-style nuts. Always re-torque after 50–100 miles. Note: 2009+ Pilot wheels (5x120) will not fit.
Historical Fitment Data Reference
In our dataset, Honda Pilot appears from 2003 to 2024 (22 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 5x120).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 10.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80 ft-lbs after 50–100 miles of driving.
- ✅ Avoid wheels with offset below 40mm to prevent rubbing on the strut or fender.
- ✅ Verify aftermarket wheels include hub-centric rings for the 64.1mm bore; otherwise, vibrations may occur.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Honda Pilot — Frequently Asked Questions
What is the bolt pattern for a 2008 Honda Pilot?
The 2008 Honda Pilot uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 45mm.
What other years of Honda Pilot have the same bolt pattern as the 2008?
The Honda Pilot uses the 5x114.3 pattern from 2003 through 2008. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
Will 2009 Honda Pilot wheels fit a 2008 model?
No. The 2009 Honda Pilot switched to a 5x120 bolt pattern, which is not compatible with the 2008 model's 5x114.3. Using mismatched patterns is unsafe.
Do 2008 Honda Pilots use lug bolts or lug nuts?
The 2008 Pilot requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Will wheels from another Honda fit my 2008 Pilot?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 64.1mm.
Can I use spacers on my 2008 Honda Pilot?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 64.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset