1996 HUMMER H1 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1996 HUMMER H1, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 |
| Center Bore (CB) | 117 mm |
| Offset (ET) | 10 |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 8x165.1 is commonly referred to as 8x6.5" in US Standard.
1996 H1 — Year-Specific Fitment Context
The 1996 HUMMER H1 is in year 4 of 14 using the 8x165.1 pattern (1993–2006). Wheels from any 1993–2006 HUMMER H1 are cross-compatible with the 1996 model.
HUMMER H1 Bolt Pattern by Year
The table below shows how the H1's wheel specifications have changed over the years. The 1996 model year is highlighted.
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
Expert Buying Guide for 1996 HUMMER H1
For your 1996 HUMMER H1, the 8x165.1 bolt pattern is shared across 1993–2006 models, ensuring cross-compatibility. However, the 117mm center bore is critical: aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. Offset is sensitive—stick to a 10mm range to avoid rubbing or suspension interference. Safety warning: Use only lug nuts with the correct thread pitch (14x1.50) and seat type (cone or ball seat, as per wheel manufacturer). Improper lug nuts can cause wheel detachment. Always torque to manufacturer specs and re-torque after 50–100 miles.
Historical Fitment Data Reference
In our dataset, HUMMER H1 appears from 1993 to 2006 (13 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50–100 miles of driving to account for wheel settling.
- ✅ Verify aftermarket wheels include hub-centric rings for the 117mm bore; otherwise, order separately.
- ✅ Check offset carefully: even a 5mm deviation can cause clearance issues with the H1's unique suspension and brake components.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1996 HUMMER H1 — Frequently Asked Questions
What is the bolt pattern for a 1996 HUMMER H1?
The 1996 HUMMER H1 uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 117mm and the offset is 10mm.
What other years of HUMMER H1 have the same bolt pattern as the 1996?
The HUMMER H1 uses the 8x165.1 pattern from 1993 through 2006. Wheels from any of these model years are dimensionally compatible with the 1996, provided the offset and center bore also match.
Why is matching the 117mm center bore important for the 1996 H1?
The 117mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Can I put aftermarket wheels on my 1996 HUMMER H1?
Absolutely. Just ensure the aftermarket wheels have a 8x165.1 bolt pattern, an offset near 10mm, and a center bore of at least 117mm (using hub rings if larger).
What lug nut size does the 1996 HUMMER H1 use?
The 1996 HUMMER H1 uses N 14x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the PCD for a 1996 HUMMER H1?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1996 H1, the PCD is 8x165.1.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset