2026 Hyundai Tucson Plug-in Hybrid Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Hyundai Tucson Plug-in Hybrid is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of 35-50, and utilizes 12x1.5 (Cone seat, 21mm hex) fasteners tightened to 80 ft-lbs (108 Nm).
2026 Hyundai Tucson Plug-in Hybrid Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 67.1 mm |
| Offset Range (ET) | 35-50 |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2026 Tucson Plug-in Hybrid — Year-Specific Fitment Context
The 2026 model year is the final year of the Hyundai Tucson Plug-in Hybrid's 5x114.3 bolt pattern run (since 2022). Wheels from any 2022–2026 Hyundai Tucson Plug-in Hybrid are cross-compatible with the 2026 model.
Hyundai Tucson Plug-in Hybrid Bolt Pattern by Year
Looking for all generations? View the complete Hyundai Tucson Plug-in Hybrid (2022–2026) Bolt Pattern & Generation Guide →
The table below shows how the Tucson Plug-in Hybrid's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Hyundai Tucson Plug-in Hybrid Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2026 Hyundai Tucson Plug-in Hybrid, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2017 Jeep Patriot | 67.1 mm (Exact) | 40 | N 12x1.50 (Cone) |
| 2020 Kia Cadenza | 67.1 mm (Exact) | 35-50 | 12x1.5 (Cone) |
| 2025 Kia Carnival | 67.1 mm (Exact) | 35-50 | 12x1.5 (Cone) |
| 2025 Kia EV6 | 67.1 mm (Exact) | 35-45 | 12x1.5 (Flat) |
| 2025 Kia EV9 | 67.1 mm (Exact) | 35-45 | 12x1.5 (Flat) |
| 2024 Kia Forte | 67.1 mm (Exact) | 35-50 | 12x1.5 (Cone) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 1997 Jeep Wrangler | 71.6 mm | 71.6mm → 67.1mm |
25 |
| 2024 Lincoln Aviator | 70.5 mm | 70.5mm → 67.1mm |
50 |
| 1994 Lincoln Continental | 70.3 mm | 70.3mm → 67.1mm |
40 |
| 1993 Lincoln Town Car | 70.3 mm | 70.3mm → 67.1mm |
10 |
| 2018 Lotus Evora 400 | 68.1 mm | 68.1mm → 67.1mm |
52 front, 69 rear |
| 2021 Lotus Evora GT | 68.0 mm | 68.0mm → 67.1mm |
50-60mm |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Hyundai Tucson Plug-in Hybrid — Frequently Asked Questions
What is the bolt pattern for a 2026 Hyundai Tucson Plug-in Hybrid?
The 2026 Hyundai Tucson Plug-in Hybrid uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Hyundai Tucson Plug-in Hybrid have the same bolt pattern as the 2026?
The Hyundai Tucson Plug-in Hybrid uses the 5x114.3 pattern from 2022 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
Do 2026 Hyundai Tucson Plug-in Hybrids use lug bolts or lug nuts?
The 2026 Tucson Plug-in Hybrid requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How do I measure the bolt pattern on my 2026 Hyundai?
The 2026 Tucson Plug-in Hybrid uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What lug nut size does the 2026 Hyundai Tucson Plug-in Hybrid use?
The 2026 Hyundai Tucson Plug-in Hybrid uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the factory wheel offset for a 2026 Hyundai Tucson Plug-in Hybrid?
The OEM offset for the 2026 Tucson Plug-in Hybrid is typically around 35-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →