2025 Hyundai Xcient Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Hyundai Xcient is 10x335. It has a center bore of 281 mm, an offset range of Not Applicable, and utilizes M22x1.5 (Flat seat, 33mm hex) fasteners tightened to 450-500 ft-lbs (610-680 Nm).
2025 Hyundai Xcient Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 10x335 |
|---|---|
| Center Bore (Hub Bore) | 281 mm |
| Offset Range (ET) | Not Applicable |
| Thread Size (Lug Nut / Bolt) | M22x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 33mm |
| Wheel Torque Specs | 450-500 ft-lbs (610-680 Nm) |
2025 Xcient — Year-Specific Fitment Context
The 2025 Hyundai Xcient is in year 2 of 3 using the 10x335 pattern (2024–2026). Wheels from any 2024–2026 Hyundai Xcient are cross-compatible with the 2025 model.
Hyundai Xcient Bolt Pattern by Year
Looking for all generations? View the complete Hyundai Xcient (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the Xcient's wheel specifications have changed over the years. The 2025 model year is highlighted.
2025 Hyundai Xcient Wheel Interchange & Donor Fitment Guide (10x335)
The 10x335 bolt pattern is shared by 23 vehicles in our database (uncommon). For safe wheel swaps on the 2025 Hyundai Xcient, donor rims must match the 10x335 PCD and have a center bore of at least 281 mm:
DIRECT HUB MATCH Same 10x335 Pattern & Exact 281mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2026 Volvo B9TL | 281 mm (Exact) | Not Applicable | M22x1.5 (Flat) |
HUB RING FITMENT Same 10x335 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2024 Volvo FE | 281.2 mm | 281.2mm → 281mm |
Not Applicable |
| 2024 Volvo B12B | 281.2 mm | 281.2mm → 281mm |
Not Applicable |
| 2024 Volvo B12M | 281.2 mm | 281.2mm → 281mm |
Not Applicable |
| 2024 Volvo B13R | 281.2 mm | 281.2mm → 281mm |
Not Applicable |
| 2024 Volvo B7R | 281.2 mm | 281.2mm → 281mm |
Not Applicable |
| 2024 Volvo B8R | 281.2 mm | 281.2mm → 281mm |
Not Applicable |
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 450-500 ft-lbs (610-680 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Hyundai Xcient — Frequently Asked Questions
What is the bolt pattern for a 2025 Hyundai Xcient?
The 2025 Hyundai Xcient uses a 10x335 bolt pattern (also called lug pattern or PCD). The center bore is 281mm and the offset is Not Applicablemm.
What other years of Hyundai Xcient have the same bolt pattern as the 2025?
The Hyundai Xcient uses the 10x335 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
What is the center bore of a 2025 Hyundai Xcient?
The factory center bore (hub bore) for the 2025 Hyundai Xcient is 281mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How tight should I torque the lug nuts on a 2025 Hyundai Xcient?
Refer to your owner's manual for exact specs, but always tighten the M22x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What lug nut size does the 2025 Hyundai Xcient use?
The 2025 Hyundai Xcient uses M22x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the factory wheel offset for a 2025 Hyundai Xcient?
The OEM offset for the 2025 Xcient is typically around Not Applicablemm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →