2026 Volvo B9TL Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Volvo B9TL is 10x335. It has a center bore of 281 mm, an offset range of Not Applicable, and utilizes M22x1.5 (Flat seat, 33mm hex) fasteners tightened to 450-500 ft-lbs (610-678 Nm).
2026 Volvo B9TL Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 10x335 |
|---|---|
| Center Bore (Hub Bore) | 281 mm |
| Offset Range (ET) | Not Applicable |
| Thread Size (Lug Nut / Bolt) | M22x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 33mm |
| Wheel Torque Specs | 450-500 ft-lbs (610-678 Nm) |
2026 B9TL — Year-Specific Fitment Context
The 2026 model year is the final year of the Volvo B9TL's 10x335 bolt pattern run (since 2024). Wheels from any 2024–2026 Volvo B9TL are cross-compatible with the 2026 model.
Volvo B9TL Bolt Pattern by Year
Looking for all generations? View the complete Volvo B9TL (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the B9TL's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Volvo B9TL Wheel Interchange & Donor Fitment Guide (10x335)
The 10x335 bolt pattern is shared by 23 vehicles in our database (uncommon). For safe wheel swaps on the 2026 Volvo B9TL, donor rims must match the 10x335 PCD and have a center bore of at least 281 mm:
DIRECT HUB MATCH Same 10x335 Pattern & Exact 281mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2024 Hyundai Xcient | 281 mm (Exact) | Not Applicable | M22x1.5 (Flat) |
HUB RING FITMENT Same 10x335 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2024 Volvo B8R | 281.2 mm | 281.2mm → 281mm |
Not Applicable |
| 2024 Volvo B9R | 281.2 mm | 281.2mm → 281mm |
Not Applicable |
| 2024 Volvo FE | 281.2 mm | 281.2mm → 281mm |
Not Applicable |
| 2024 Volvo B12B | 281.2 mm | 281.2mm → 281mm |
Not Applicable |
| 2024 Volvo B12M | 281.2 mm | 281.2mm → 281mm |
Not Applicable |
| 2024 Volvo B13R | 281.2 mm | 281.2mm → 281mm |
Not Applicable |
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 450-500 ft-lbs (610-678 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Volvo B9TL — Frequently Asked Questions
What is the bolt pattern for a 2026 Volvo B9TL?
The 2026 Volvo B9TL uses a 10x335 bolt pattern (also called lug pattern or PCD). The center bore is 281mm and the offset is Not Applicablemm.
What other years of Volvo B9TL have the same bolt pattern as the 2026?
The Volvo B9TL uses the 10x335 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
What does Not Applicablemm offset mean for the 2026 B9TL?
An offset of Not Applicablemm means the wheel's mounting surface is Not Applicablemm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Volvo.
Do 2026 Volvo B9TLs use lug bolts or lug nuts?
The 2026 B9TL requires M22x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Why is matching the 281mm center bore important for the 2026 B9TL?
The 281mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Will wheels from another Volvo fit my 2026 B9TL?
Only if they share the exact same 10x335 bolt pattern, a compatible offset, and a center bore equal to or larger than 281mm.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →