2025 Volvo B9TL Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Volvo B9TL is 10x335. It has a center bore of 281 mm, an offset range of Not Applicable, and utilizes M22x1.5 (Flat seat, 33mm hex) fasteners tightened to 450-500 ft-lbs (610-678 Nm).
2025 Volvo B9TL Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 10x335 |
|---|---|
| Center Bore (Hub Bore) | 281 mm |
| Offset Range (ET) | Not Applicable |
| Thread Size (Lug Nut / Bolt) | M22x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 33mm |
| Wheel Torque Specs | 450-500 ft-lbs (610-678 Nm) |
2025 B9TL — Year-Specific Fitment Context
The 2025 Volvo B9TL is in year 2 of 3 using the 10x335 pattern (2024–2026). Wheels from any 2024–2026 Volvo B9TL are cross-compatible with the 2025 model.
Volvo B9TL Bolt Pattern by Year
Looking for all generations? View the complete Volvo B9TL (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the B9TL's wheel specifications have changed over the years. The 2025 model year is highlighted.
2025 Volvo B9TL Wheel Interchange & Donor Fitment Guide (10x335)
The 10x335 bolt pattern is shared by 23 vehicles in our database (uncommon). For safe wheel swaps on the 2025 Volvo B9TL, donor rims must match the 10x335 PCD and have a center bore of at least 281 mm:
DIRECT HUB MATCH Same 10x335 Pattern & Exact 281mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2024 Hyundai Xcient | 281 mm (Exact) | Not Applicable | M22x1.5 (Flat) |
HUB RING FITMENT Same 10x335 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2024 Volvo B13R | 281.2 mm | 281.2mm → 281mm |
Not Applicable |
| 2024 Volvo B7R | 281.2 mm | 281.2mm → 281mm |
Not Applicable |
| 2024 Volvo B8R | 281.2 mm | 281.2mm → 281mm |
Not Applicable |
| 2024 Volvo B9R | 281.2 mm | 281.2mm → 281mm |
Not Applicable |
| 2024 Volvo FE | 281.2 mm | 281.2mm → 281mm |
Not Applicable |
| 2024 Volvo B12B | 281.2 mm | 281.2mm → 281mm |
Not Applicable |
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 450-500 ft-lbs (610-678 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Volvo B9TL — Frequently Asked Questions
What is the bolt pattern for a 2025 Volvo B9TL?
The 2025 Volvo B9TL uses a 10x335 bolt pattern (also called lug pattern or PCD). The center bore is 281mm and the offset is Not Applicablemm.
What other years of Volvo B9TL have the same bolt pattern as the 2025?
The Volvo B9TL uses the 10x335 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
What lug nut size does the 2025 Volvo B9TL use?
The 2025 Volvo B9TL uses M22x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Will wheels from another Volvo fit my 2025 B9TL?
Only if they share the exact same 10x335 bolt pattern, a compatible offset, and a center bore equal to or larger than 281mm.
What is the factory wheel offset for a 2025 Volvo B9TL?
The OEM offset for the 2025 B9TL is typically around Not Applicablemm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How tight should I torque the lug nuts on a 2025 Volvo B9TL?
Refer to your owner's manual for exact specs, but always tighten the M22x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →