2004 Hyundai XG350 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2004 Hyundai XG350, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2004 XG350 — Year-Specific Fitment Context
The 2004 Hyundai XG350 is in year 3 of 4 using the 5x114.3 pattern (2002–2005). Wheels from any 2002–2005 Hyundai XG350 are cross-compatible with the 2004 model.
Hyundai XG350 Bolt Pattern by Year
The table below shows how the XG350's wheel specifications have changed over the years. The 2004 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2004 Hyundai XG350
The 2004 Hyundai XG350 uses a 5x114.3 bolt pattern with a 67.1mm center bore. When selecting aftermarket wheels, hub-centric rings are mandatory to ensure the wheel is centered on the hub, preventing vibrations and stress on lug studs. The offset range is 35-50mm; staying within this range maintains proper suspension geometry and prevents tire rubbing on the strut or fender. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—either conical (60-degree) or ball seat, matching the wheel's design. Never use incorrect lug nuts, as this can lead to wheel loosening or damage. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Hyundai XG350 appears from 2002 to 2005 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels with a center bore larger than 67.1mm without hub-centric rings; vibration and stud failure may occur.
- ✅ Check for clearance between the wheel spokes and brake calipers, especially with lower offset wheels (35mm).
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2004 Hyundai XG350 — Frequently Asked Questions
What is the bolt pattern for a 2004 Hyundai XG350?
The 2004 Hyundai XG350 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Hyundai XG350 have the same bolt pattern as the 2004?
The Hyundai XG350 uses the 5x114.3 pattern from 2002 through 2005. Wheels from any of these model years are dimensionally compatible with the 2004, provided the offset and center bore also match.
Will wheels from another Hyundai fit my 2004 XG350?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
What does 35-50mm offset mean for the 2004 XG350?
An offset of 35-50mm means the wheel's mounting surface is 35-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Hyundai.
What is the center bore of a 2004 Hyundai XG350?
The factory center bore (hub bore) for the 2004 Hyundai XG350 is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the PCD for a 2004 Hyundai XG350?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2004 XG350, the PCD is 5x114.3.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset