2007 Isuzu Ascender Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Isuzu Ascender, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x127 |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 78.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2007 Ascender — Year-Specific Fitment Context
The 2007 Isuzu Ascender is in year 5 of 6 using the 6x127 pattern (2003–2008). Wheels from any 2003–2008 Isuzu Ascender are cross-compatible with the 2007 model.
Isuzu Ascender Bolt Pattern by Year
The table below shows how the Ascender's wheel specifications have changed over the years. The 2007 model year is highlighted.
Fitment Notes
The 2007 Isuzu Ascender has a bolt pattern of 6x127.
This means it is a 6 lug pattern with a circle diameter of 127mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Isuzu Ascender appears from 2003 to 2008 (6 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
6x127 Pattern Context
This bolt pattern appears on 49 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x127:
2007 Isuzu Ascender — Frequently Asked Questions
What is the bolt pattern for a 2007 Isuzu Ascender?
The 2007 Isuzu Ascender uses a 6x127 bolt pattern (also called lug pattern or PCD). The center bore is 78.1mm and the offset is 50mm.
What other years of Isuzu Ascender have the same bolt pattern as the 2007?
The Isuzu Ascender uses the 6x127 pattern from 2003 through 2008. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
What is the PCD for a 2007 Isuzu Ascender?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2007 Ascender, the PCD is 6x127.
How do I measure the bolt pattern on my 2007 Isuzu?
The 2007 Ascender uses a 6x127 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Why is matching the 78.1mm center bore important for the 2007 Ascender?
The 78.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the center bore of a 2007 Isuzu Ascender?
The factory center bore (hub bore) for the 2007 Isuzu Ascender is 78.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Editorial Fitment Notes
Isuzu Ascender is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2003-2008 (6 model years).
- Observed bolt-pattern variants: 1 (6x127).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2007 Isuzu Ascender, please report it via our About page contact so we can verify and update this record.