2008 Isuzu Ascender Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Isuzu Ascender, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x127 |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 78.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2008 Ascender — Year-Specific Fitment Context
The 2008 model year is the final year of the Isuzu Ascender's 6x127 bolt pattern run (since 2003). Wheels from any 2003–2008 Isuzu Ascender are cross-compatible with the 2008 model.
Isuzu Ascender Bolt Pattern by Year
The table below shows how the Ascender's wheel specifications have changed over the years. The 2008 model year is highlighted.
6x127 Pattern Context
This bolt pattern appears on 49 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x127:
Expert Buying Guide for 2008 Isuzu Ascender
For your 2008 Isuzu Ascender, the 6x127 bolt pattern and 78.1mm center bore are critical. Aftermarket wheels often have a larger center bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 50mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct 12x1.5 thread pitch and a conical (60-degree) or ball seat to match the wheel. Never use incorrect seat types, as this can lead to wheel loosening. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Isuzu Ascender appears from 2003 to 2008 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, verify hub-centric ring inner diameter matches 78.1mm.
- ✅ Avoid spacers unless hub-centric; they can alter offset and stress bearings.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Isuzu Ascender — Frequently Asked Questions
What is the bolt pattern for a 2008 Isuzu Ascender?
The 2008 Isuzu Ascender uses a 6x127 bolt pattern (also called lug pattern or PCD). The center bore is 78.1mm and the offset is 50mm.
What other years of Isuzu Ascender have the same bolt pattern as the 2008?
The Isuzu Ascender uses the 6x127 pattern from 2003 through 2008. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
Can I use spacers on my 2008 Isuzu Ascender?
Yes, but ensure the wheel spacers match the 6x127 bolt pattern and 78.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
Do 2008 Isuzu Ascenders use lug bolts or lug nuts?
The 2008 Ascender requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the PCD for a 2008 Isuzu Ascender?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2008 Ascender, the PCD is 6x127.
Will wheels from another Isuzu fit my 2008 Ascender?
Only if they share the exact same 6x127 bolt pattern, a compatible offset, and a center bore equal to or larger than 78.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset