2025 Isuzu FVR Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Isuzu FVR is 10x285.75. It has a center bore of 220 mm, an offset range of Not Applicable, and utilizes M22x1.5 (Flat seat, 33mm hex) fasteners tightened to 450-500 ft-lbs (610-678 Nm).
2025 Isuzu FVR Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 10x285.75 |
|---|---|
| Center Bore (Hub Bore) | 220 mm |
| Offset Range (ET) | Not Applicable |
| Thread Size (Lug Nut / Bolt) | M22x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 33mm |
| Wheel Torque Specs | 450-500 ft-lbs (610-678 Nm) |
2025 FVR — Year-Specific Fitment Context
The 2025 Isuzu FVR is in year 2 of 3 using the 10x285.75 pattern (2024–2026). Wheels from any 2024–2026 Isuzu FVR are cross-compatible with the 2025 model.
Isuzu FVR Bolt Pattern by Year
Looking for all generations? View the complete Isuzu FVR (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the FVR's wheel specifications have changed over the years. The 2025 model year is highlighted.
2025 Isuzu FVR Wheel Interchange & Donor Fitment Guide (10x285.75)
The 10x285.75 bolt pattern is shared by 218 vehicles in our database (moderately common). For safe wheel swaps on the 2025 Isuzu FVR, donor rims must match the 10x285.75 PCD and have a center bore of at least 220 mm:
DIRECT HUB MATCH Same 10x285.75 Pattern & Exact 220mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2026 Freightliner Columbia | 220.1 mm (Exact) | Not Applicable | 22x1.5 (Flat) |
| 2025 Freightliner Condor | 220 mm (Exact) | Not Applicable | 22x1.5 (Cone) |
| 2024 Freightliner Coronado | 220 mm (Exact) | Not Applicable | 22x1.5 (Cone) |
| 2024 Freightliner CST112 | 220.1 mm (Exact) | Not Applicable | 22x1.5 (Cone) |
| 2024 Freightliner CST120 | 220 mm (Exact) | Not Applicable | 22x1.5 (Cone) |
| 2024 Freightliner eCascadia | 220 mm (Exact) | Not Applicable | 22x1.5 (Cone) |
HUB RING FITMENT Same 10x285.75 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2024 Freightliner EF Front Engine Bus Chassis | 221.1 mm | 221.1mm → 220mm |
Not Applicable |
| 2024 Freightliner EFX Front Engine Bus Chassis | 222 mm | 222mm → 220mm |
Not Applicable |
| 2024 Freightliner MD109 | 222 mm | 222mm → 220mm |
Not Applicable |
| 2024 Freightliner NGE (956) Platform Truck COE | 221 mm | 221mm → 220mm |
Not Applicable |
| 2024 Freightliner S2 106 Bus Chassis | 221.1 mm | 221.1mm → 220mm |
Not Applicable |
| 2024 Volvo VAH | 221 mm | 221mm → 220mm |
Not Applicable |
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 450-500 ft-lbs (610-678 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Isuzu FVR — Frequently Asked Questions
What is the bolt pattern for a 2025 Isuzu FVR?
The 2025 Isuzu FVR uses a 10x285.75 bolt pattern (also called lug pattern or PCD). The center bore is 220mm and the offset is Not Applicablemm.
What other years of Isuzu FVR have the same bolt pattern as the 2025?
The Isuzu FVR uses the 10x285.75 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
What lug nut size does the 2025 Isuzu FVR use?
The 2025 Isuzu FVR uses M22x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the factory wheel offset for a 2025 Isuzu FVR?
The OEM offset for the 2025 FVR is typically around Not Applicablemm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the PCD for a 2025 Isuzu FVR?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2025 FVR, the PCD is 10x285.75.
Do 2025 Isuzu FVRs use lug bolts or lug nuts?
The 2025 FVR requires M22x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →