1994 Jeep Cherokee Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1994 Jeep Cherokee, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 1/2" |
| Center Bore (CB) | 71.6 mm |
| Offset (ET) | 32 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1994 Cherokee — Year-Specific Fitment Context
The 1994 Jeep Cherokee is in year 3 of 10 using the 5x114.3 pattern (1992–2001). Wheels from any 1992–2001 Jeep Cherokee are cross-compatible with the 1994 model. Across its full production run (1992–2022), the Cherokee has also used: 5x110.
Jeep Cherokee Bolt Pattern by Year
The table below shows how the Cherokee's wheel specifications have changed over the years. The 1994 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 71.6 | 32 |
| 1993 | 5x114.3 | 71.6 | 32 |
| ▸ 1994 | 5x114.3 | 71.6 | 32 |
| 1995 | 5x114.3 | 71.6 | 32 |
| 1996 | 5x114.3 | 71.6 | 32 |
| 1997 | 5x114.3 | 71.6 | 32 |
| 1998 | 5x114.3 | 71.6 | 32 |
| 1999 | 5x114.3 | 71.6 | 32 |
| 2000 | 5x114.3 | 71.6 | 32 |
| 2001 | 5x114.3 | 71.6 | 32 |
| 2014 | 5x110 | 65.1 | 42 |
| 2015 | 5x110 | 65.1 | 42 |
| 2016 | 5x110 | 65.1 | 42 |
| 2017 | 5x110 | 65.1 | 42 |
| 2018 | 5x110 | 65.1 | 42 |
| 2019 | 5x110 | 65.1 | 42 |
| 2020 | 5x110 | 65.1 | 40 |
| 2021 | 5x110 | 65.1 | 40 |
| 2022 | 5x110 | 65.1 | 40 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1994 Jeep Cherokee
For your 1994 Jeep Cherokee, the 5x114.3 bolt pattern is shared with 1992–2001 models, but the 71.6mm center bore is critical. Aftermarket wheels often have a larger bore (73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive: stock is 32mm, but 0–40mm can work depending on tire width and suspension. Exceeding this range may cause rubbing or bearing stress. Always use the correct lug nuts: 1/2" thread with a conical (60-degree) seat. Never use ball-seat lug nuts on conical wheels—this can cause wheel loss. Re-torque after 50–100 miles.
Historical Fitment Data Reference
In our dataset, Jeep Cherokee appears from 1992 to 2022 (19 model years). Across model years, this model appears with 2 bolt patterns (5x110, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 10.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 95–110 ft-lbs after 50–100 miles of driving to account for settling.
- ✅ If using wheels from a 1992–2001 Cherokee, verify center bore; aftermarket wheels may need hub rings.
- ✅ Avoid wheels with offset below 25mm or above 40mm to prevent rubbing on stock suspension.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1994 Jeep Cherokee — Frequently Asked Questions
What is the bolt pattern for a 1994 Jeep Cherokee?
The 1994 Jeep Cherokee uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 32mm.
What other years of Jeep Cherokee have the same bolt pattern as the 1994?
The Jeep Cherokee uses the 5x114.3 pattern from 1992 through 2001. Wheels from any of these model years are dimensionally compatible with the 1994, provided the offset and center bore also match.
What does 32mm offset mean for the 1994 Cherokee?
An offset of 32mm means the wheel's mounting surface is 32mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Jeep.
What is the factory wheel offset for a 1994 Jeep Cherokee?
The OEM offset for the 1994 Cherokee is typically around 32mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How tight should I torque the lug nuts on a 1994 Jeep Cherokee?
Refer to your owner's manual for exact specs, but always tighten the N 1/2" hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the center bore of a 1994 Jeep Cherokee?
The factory center bore (hub bore) for the 1994 Jeep Cherokee is 71.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset