2000 Jeep Cherokee Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Jeep Cherokee, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 1/2" |
| Center Bore (CB) | 71.6 mm |
| Offset (ET) | 32 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2000 Cherokee — Year-Specific Fitment Context
The 2000 Jeep Cherokee is in year 9 of 10 using the 5x114.3 pattern (1992–2001). Wheels from any 1992–2001 Jeep Cherokee are cross-compatible with the 2000 model. Across its full production run (1992–2022), the Cherokee has also used: 5x110.
Jeep Cherokee Bolt Pattern by Year
The table below shows how the Cherokee's wheel specifications have changed over the years. The 2000 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 71.6 | 32 |
| 1993 | 5x114.3 | 71.6 | 32 |
| 1994 | 5x114.3 | 71.6 | 32 |
| 1995 | 5x114.3 | 71.6 | 32 |
| 1996 | 5x114.3 | 71.6 | 32 |
| 1997 | 5x114.3 | 71.6 | 32 |
| 1998 | 5x114.3 | 71.6 | 32 |
| 1999 | 5x114.3 | 71.6 | 32 |
| ▸ 2000 | 5x114.3 | 71.6 | 32 |
| 2001 | 5x114.3 | 71.6 | 32 |
| 2014 | 5x110 | 65.1 | 42 |
| 2015 | 5x110 | 65.1 | 42 |
| 2016 | 5x110 | 65.1 | 42 |
| 2017 | 5x110 | 65.1 | 42 |
| 2018 | 5x110 | 65.1 | 42 |
| 2019 | 5x110 | 65.1 | 42 |
| 2020 | 5x110 | 65.1 | 40 |
| 2021 | 5x110 | 65.1 | 40 |
| 2022 | 5x110 | 65.1 | 40 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2000 Jeep Cherokee
For your 2000 Jeep Cherokee, the 5x114.3 bolt pattern is shared with all 1992–2001 models, ensuring cross-compatibility. However, the center bore is 71.6mm—larger than many aftermarket wheels. You must use hub-centric rings to prevent vibration and ensure proper load transfer. Offset is critical: the factory spec is 32mm. Going too low (e.g., 0mm) can cause rubbing and bearing stress; too high (e.g., 45mm) may contact suspension. Always verify lug nut thread pitch (1/2"-20) and seat type: use conical (60-degree) or ball seat nuts as required by the wheel. Never mix seat types. After installation, re-torque after 50–100 miles.
Historical Fitment Data Reference
In our dataset, Jeep Cherokee appears from 1992 to 2022 (19 model years). Across model years, this model appears with 2 bolt patterns (5x110, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 10.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 95–105 ft-lbs after 50–100 miles of driving.
- ✅ If using aftermarket wheels, ensure hub-centric rings are installed to match the 71.6mm center bore.
- ✅ Avoid wheels with offset below 25mm or above 40mm to prevent clearance issues with brakes and suspension.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2000 Jeep Cherokee — Frequently Asked Questions
What is the bolt pattern for a 2000 Jeep Cherokee?
The 2000 Jeep Cherokee uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 32mm.
What other years of Jeep Cherokee have the same bolt pattern as the 2000?
The Jeep Cherokee uses the 5x114.3 pattern from 1992 through 2001. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
What is the PCD for a 2000 Jeep Cherokee?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2000 Cherokee, the PCD is 5x114.3.
What is the center bore of a 2000 Jeep Cherokee?
The factory center bore (hub bore) for the 2000 Jeep Cherokee is 71.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Do 2000 Jeep Cherokees use lug bolts or lug nuts?
The 2000 Cherokee requires N 1/2" hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How tight should I torque the lug nuts on a 2000 Jeep Cherokee?
Refer to your owner's manual for exact specs, but always tighten the N 1/2" hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset