1997 Jeep Cherokee Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1997 Jeep Cherokee, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 1/2" |
| Center Bore (CB) | 71.6 mm |
| Offset (ET) | 32 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1997 Cherokee — Year-Specific Fitment Context
The 1997 Jeep Cherokee is in year 6 of 10 using the 5x114.3 pattern (1992–2001). Wheels from any 1992–2001 Jeep Cherokee are cross-compatible with the 1997 model. Across its full production run (1992–2022), the Cherokee has also used: 5x110.
Jeep Cherokee Bolt Pattern by Year
The table below shows how the Cherokee's wheel specifications have changed over the years. The 1997 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 71.6 | 32 |
| 1993 | 5x114.3 | 71.6 | 32 |
| 1994 | 5x114.3 | 71.6 | 32 |
| 1995 | 5x114.3 | 71.6 | 32 |
| 1996 | 5x114.3 | 71.6 | 32 |
| ▸ 1997 | 5x114.3 | 71.6 | 32 |
| 1998 | 5x114.3 | 71.6 | 32 |
| 1999 | 5x114.3 | 71.6 | 32 |
| 2000 | 5x114.3 | 71.6 | 32 |
| 2001 | 5x114.3 | 71.6 | 32 |
| 2014 | 5x110 | 65.1 | 42 |
| 2015 | 5x110 | 65.1 | 42 |
| 2016 | 5x110 | 65.1 | 42 |
| 2017 | 5x110 | 65.1 | 42 |
| 2018 | 5x110 | 65.1 | 42 |
| 2019 | 5x110 | 65.1 | 42 |
| 2020 | 5x110 | 65.1 | 40 |
| 2021 | 5x110 | 65.1 | 40 |
| 2022 | 5x110 | 65.1 | 40 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1997 Jeep Cherokee
For your 1997 Jeep Cherokee, the 5x114.3 bolt pattern is shared with 1992–2001 models. The 71.6mm center bore is critical; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive: stock is 32mm, but 0–40mm may fit with careful checking. Avoid excessive offset changes to prevent bearing wear and clearance issues. Always use the correct lug nuts: 1/2" thread with a conical (60-degree) seat. Never use ball-seat lug nuts, as they can loosen. Re-torque after 50–100 miles.
Historical Fitment Data Reference
In our dataset, Jeep Cherokee appears from 1992 to 2022 (19 model years). Across model years, this model appears with 2 bolt patterns (5x110, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 10.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 95–105 ft-lb after 50–100 miles of driving.
- ✅ Check inner clearance: aftermarket wheels may rub on control arms or sway bar links at full lock.
- ✅ Use hub-centric rings (71.6mm bore to wheel bore) to avoid vibrations and center the wheel properly.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1997 Jeep Cherokee — Frequently Asked Questions
What is the bolt pattern for a 1997 Jeep Cherokee?
The 1997 Jeep Cherokee uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 32mm.
What other years of Jeep Cherokee have the same bolt pattern as the 1997?
The Jeep Cherokee uses the 5x114.3 pattern from 1992 through 2001. Wheels from any of these model years are dimensionally compatible with the 1997, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 1997 Jeep Cherokee?
Refer to your owner's manual for exact specs, but always tighten the N 1/2" hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Do 1997 Jeep Cherokees use lug bolts or lug nuts?
The 1997 Cherokee requires N 1/2" hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How do I measure the bolt pattern on my 1997 Jeep?
The 1997 Cherokee uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the factory wheel offset for a 1997 Jeep Cherokee?
The OEM offset for the 1997 Cherokee is typically around 32mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset