2008 Jeep Commander Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Jeep Commander, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x127 (5x5") |
|---|---|
| Lug Nut / Bolt Size | N 1/2" |
| Center Bore (CB) | 71.6 mm |
| Offset (ET) | 50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x127 is commonly referred to as 5x5" in US Standard.
2008 Commander — Year-Specific Fitment Context
The 2008 Jeep Commander is in year 3 of 5 using the 5x127 pattern (2006–2010). Wheels from any 2006–2010 Jeep Commander are cross-compatible with the 2008 model.
Jeep Commander Bolt Pattern by Year
The table below shows how the Commander's wheel specifications have changed over the years. The 2008 model year is highlighted.
5x127 Pattern Context
This bolt pattern appears on 236 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x127:
Expert Buying Guide for 2008 Jeep Commander
For your 2008 Jeep Commander, the 5x127 bolt pattern and 71.6mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 78.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive: stock is 50mm; deviations beyond ±10mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (1/2"-20) and seat type—factory uses conical (60-degree) seats. Using incorrect lug nuts (e.g., ball seat) can lead to wheel loss. Re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Jeep Commander appears from 2006 to 2010 (5 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100-110 ft-lbs after 50 miles of driving.
- ✅ Avoid wheels with offset below 40mm or above 60mm to prevent rubbing on suspension or fenders.
- ✅ Use hub-centric rings if aftermarket wheels have a larger center bore than 71.6mm.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Jeep Commander — Frequently Asked Questions
What is the bolt pattern for a 2008 Jeep Commander?
The 2008 Jeep Commander uses a 5x127 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 50mm.
What other years of Jeep Commander have the same bolt pattern as the 2008?
The Jeep Commander uses the 5x127 pattern from 2006 through 2010. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2008 Jeep Commander?
Absolutely. Just ensure the aftermarket wheels have a 5x127 bolt pattern, an offset near 50mm, and a center bore of at least 71.6mm (using hub rings if larger).
What is the factory wheel offset for a 2008 Jeep Commander?
The OEM offset for the 2008 Commander is typically around 50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Do 2008 Jeep Commanders use lug bolts or lug nuts?
The 2008 Commander requires N 1/2" hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Why is matching the 71.6mm center bore important for the 2008 Commander?
The 71.6mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset