2024 Jeep Wagoneer S Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2024 Jeep Wagoneer S is 5x127 (5x5"). It has a center bore of 71.6 mm, an offset range of 35-45, and utilizes 14x1.5 (Cone seat, 22mm hex) fasteners tightened to 94 ft-lbs (127 Nm).
2024 Jeep Wagoneer S Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x127 (5x5") |
|---|---|
| Center Bore (Hub Bore) | 71.6 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 22mm |
| Wheel Torque Specs | 94 ft-lbs (127 Nm) |
Imperial Match: 5x127 is commonly referred to as 5x5" in US Standard.
2024 Wagoneer S — Year-Specific Fitment Context
The 2024 model year marks the beginning of the Jeep Wagoneer S's 5x127 bolt pattern era, which continued through 2026 (3 consecutive years). Wheels from any 2024–2026 Jeep Wagoneer S are cross-compatible with the 2024 model.
Jeep Wagoneer S Bolt Pattern by Year
Looking for all generations? View the complete Jeep Wagoneer S (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the Wagoneer S's wheel specifications have changed over the years. The 2024 model year is highlighted.
2024 Jeep Wagoneer S Wheel Interchange & Donor Fitment Guide (5x127)
The 5x127 bolt pattern is shared by 295 vehicles in our database (moderately common). For safe wheel swaps on the 2024 Jeep Wagoneer S, donor rims must match the 5x127 PCD and have a center bore of at least 71.6 mm:
DIRECT HUB MATCH Same 5x127 Pattern & Exact 71.6mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2006 Chrysler Pacifica | 71.5 mm (Exact) | 46 | N 12x1.50 (Cone) |
| 2019 Chrysler Pacifica Hybrid | 71.5 mm (Exact) | 50 | 12x1.5 (Cone) |
| 2009 Chrysler Town & Country | 71.6 mm (Exact) | 40 | N 12x1.50 (Cone) |
| 2020 Chrysler Voyager | 71.5 mm (Exact) | 40-50mm | M14x1.5 (Cone) |
| 2024 Dodge Charger | 71.6 mm (Exact) | 18-25 | 14x1.5 (Cone) |
| 2012 Dodge Durango | 71.6 mm (Exact) | 53 | N 1/2" (20 UNF) (Cone) |
HUB RING FITMENT Same 5x127 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 1994 Cadillac Fleetwood | 78.3 mm | 78.3mm → 71.6mm |
12 |
| 1992 Land Rover Range Rover | 78.1 mm | 78.1mm → 71.6mm |
50 |
| 1992 Oldsmobile Custom Cruiser | 78.3 mm | 78.3mm → 71.6mm |
12 |
| 1992 Buick Roadmaster | 78.3 mm | 78.3mm → 71.6mm |
12 |
| 1992 Chevrolet Astro Cargo | 78.1 mm | 78.1mm → 71.6mm |
0 |
| 1992 Chevrolet Astro Passenger | 78.1 mm | 78.1mm → 71.6mm |
0 |
Quick Tips & Safety Warnings
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 94 ft-lbs (127 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Jeep Wagoneer S — Frequently Asked Questions
What is the bolt pattern for a 2024 Jeep Wagoneer S?
The 2024 Jeep Wagoneer S uses a 5x127 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 35-45mm.
What other years of Jeep Wagoneer S have the same bolt pattern as the 2024?
The Jeep Wagoneer S uses the 5x127 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
Will wheels from another Jeep fit my 2024 Wagoneer S?
Only if they share the exact same 5x127 bolt pattern, a compatible offset, and a center bore equal to or larger than 71.6mm.
How tight should I torque the lug nuts on a 2024 Jeep Wagoneer S?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What does 35-45mm offset mean for the 2024 Wagoneer S?
An offset of 35-45mm means the wheel's mounting surface is 35-45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Jeep.
Can I use spacers on my 2024 Jeep Wagoneer S?
Yes, but ensure the wheel spacers match the 5x127 bolt pattern and 71.6mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →