2026 Jeep Wagoneer S Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Jeep Wagoneer S is 5x127 (5x5"). It has a center bore of 71.6 mm, an offset range of 35-45, and utilizes 14x1.5 (Cone seat, 22mm hex) fasteners tightened to 94 ft-lbs (127 Nm).
2026 Jeep Wagoneer S Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x127 (5x5") |
|---|---|
| Center Bore (Hub Bore) | 71.6 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 22mm |
| Wheel Torque Specs | 94 ft-lbs (127 Nm) |
Imperial Match: 5x127 is commonly referred to as 5x5" in US Standard.
2026 Wagoneer S — Year-Specific Fitment Context
The 2026 model year is the final year of the Jeep Wagoneer S's 5x127 bolt pattern run (since 2024). Wheels from any 2024–2026 Jeep Wagoneer S are cross-compatible with the 2026 model.
Jeep Wagoneer S Bolt Pattern by Year
Looking for all generations? View the complete Jeep Wagoneer S (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the Wagoneer S's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Jeep Wagoneer S Wheel Interchange & Donor Fitment Guide (5x127)
The 5x127 bolt pattern is shared by 295 vehicles in our database (moderately common). For safe wheel swaps on the 2026 Jeep Wagoneer S, donor rims must match the 5x127 PCD and have a center bore of at least 71.6 mm:
DIRECT HUB MATCH Same 5x127 Pattern & Exact 71.6mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 Jeep Grand Cherokee | 71.5 mm (Exact) | 35-45 | 14x1.5 (Cone) |
| 2025 Jeep Grand Cherokee 4xe | 71.5 mm (Exact) | 56 | 14x1.5 (Cone) |
| 2025 Jeep Grand Cherokee L | 71.5 mm (Exact) | 35-45 | 14x1.5 (Cone) |
| 2025 Jeep Recon | 71.5 mm (Exact) | 30-40 | 14x1.5 (Cone) |
| 2006 Jeep Wrangler | 71.6 mm (Exact) | 44 | N 1/2" (Cone) |
| 2024 Jeep Wrangler 2 Door | 71.5 mm (Exact) | 44 | 14x1.5 (Cone) |
HUB RING FITMENT Same 5x127 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 1994 Cadillac Fleetwood | 78.3 mm | 78.3mm → 71.6mm |
12 |
| 1992 GMC Safari Cargo | 78.1 mm | 78.1mm → 71.6mm |
0 |
| 1992 GMC Safari Passenger | 78.1 mm | 78.1mm → 71.6mm |
0 |
| 1996 GMC Savana 1500 Cargo | 78.1 mm | 78.1mm → 71.6mm |
20-30 |
| 1996 GMC Savana 1500 Passenger | 78.1 mm | 78.1mm → 71.6mm |
20-30 |
| 1992 Land Rover Range Rover | 78.1 mm | 78.1mm → 71.6mm |
50 |
Quick Tips & Safety Warnings
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 94 ft-lbs (127 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Jeep Wagoneer S — Frequently Asked Questions
What is the bolt pattern for a 2026 Jeep Wagoneer S?
The 2026 Jeep Wagoneer S uses a 5x127 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 35-45mm.
What other years of Jeep Wagoneer S have the same bolt pattern as the 2026?
The Jeep Wagoneer S uses the 5x127 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2026 Jeep Wagoneer S?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I put aftermarket wheels on my 2026 Jeep Wagoneer S?
Absolutely. Just ensure the aftermarket wheels have a 5x127 bolt pattern, an offset near 35-45mm, and a center bore of at least 71.6mm (using hub rings if larger).
How do I measure the bolt pattern on my 2026 Jeep?
The 2026 Wagoneer S uses a 5x127 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Will wheels from another Jeep fit my 2026 Wagoneer S?
Only if they share the exact same 5x127 bolt pattern, a compatible offset, and a center bore equal to or larger than 71.6mm.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →