1999 Land Rover Discovery Series II Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1999 Land Rover Discovery Series II, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 45 |
| Torque Specs | 100 ft-lbs (135 Nm) |
1999 Discovery Series II — Year-Specific Fitment Context
The 1999 model year marks the beginning of the Land Rover Discovery Series II's 5x108 bolt pattern era, which continued through 2002 (4 consecutive years). Wheels from any 1999–2002 Land Rover Discovery Series II are cross-compatible with the 1999 model.
Land Rover Discovery Series II Bolt Pattern by Year
The table below shows how the Discovery Series II's wheel specifications have changed over the years. The 1999 model year is highlighted.
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Expert Buying Guide for 1999 Land Rover Discovery Series II
For your 1999 Land Rover Discovery Series II, the 5x108 bolt pattern and 63.4mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive: stick to 45mm ±5mm to avoid rubbing or clearance issues. Always use the correct 14x1.5 lug nuts with the proper seat type—conical (60-degree) or ball seat—matching the wheel's design. Incorrect lug nuts can cause wheel loosening. Re-torque after 50-100 miles. Avoid wheels from other 5x108 vehicles (e.g., Ford) without verifying center bore and offset.
Historical Fitment Data Reference
In our dataset, Land Rover Discovery Series II appears from 1999 to 2002 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 103-115 Nm (76-85 lb-ft) after 50-100 miles of driving.
- ✅ If using aftermarket wheels, ensure hub-centric rings are installed; plastic rings are acceptable but metal is preferred for durability.
- ✅ Check wheel clearance with the front calipers and rear axle; some aftermarket wheels may require spacers or have insufficient brake clearance.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1999 Land Rover Discovery Series II — Frequently Asked Questions
What is the bolt pattern for a 1999 Land Rover Discovery Series II?
The 1999 Land Rover Discovery Series II uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 45mm.
What other years of Land Rover Discovery Series II have the same bolt pattern as the 1999?
The Land Rover Discovery Series II uses the 5x108 pattern from 1999 through 2002. Wheels from any of these model years are dimensionally compatible with the 1999, provided the offset and center bore also match.
Can I put aftermarket wheels on my 1999 Land Rover Discovery Series II?
Absolutely. Just ensure the aftermarket wheels have a 5x108 bolt pattern, an offset near 45mm, and a center bore of at least 63.4mm (using hub rings if larger).
Will wheels from another Land Rover fit my 1999 Discovery Series II?
Only if they share the exact same 5x108 bolt pattern, a compatible offset, and a center bore equal to or larger than 63.4mm.
Do 1999 Land Rover Discovery Series IIs use lug bolts or lug nuts?
The 1999 Discovery Series II requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How do I measure the bolt pattern on my 1999 Land Rover?
The 1999 Discovery Series II uses a 5x108 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset